Abstract:<p>A 1.7 μm Tm-doped continue-wave and pulse fiber laser based on variable pulse generated mechanisms is proposed and experimentally demonstrated. The modulated pump was used to generate pulses in the cavity by switching mechanisms easily (gain-switched, self-saturable absorber and active mode-locking via pump modulation (AMPM)). In the laser scheme, a 1.55 μm amplified optically modulated signal generator was used as a homemade pump, including a semiconductor laser, a pulse signal driver and an erbium-doped fiber amplifier (EDFA). A 3-m long thulium-doped fiber (TDF) was pumped to obtained gain which covered 1.7 µm band. A Fiber Bragg Grating (FBG) is employed as a spectrum filter. Using the proposed scheme, we achieved the laser with a central wavelength of 1727.92 nm. The laser had a high Side-Mode Suppression Ratio (SMSR) of 59 dB and a 3 dB linewidth of 0.18 nm. Additionally, we modulated the pump, and the pulse train with a repetition rate from 10 kHz to100 kHz based on gain-switched mechanism was obtained. Aim to increase the repetition rate, the generation of self-mode-locked pulses with a repetition rate of 11.39 MHz was observed associating with a self-saturable absorber using a CW pump. Moreover, We adjusted the modulated frequency of pump to match with the free spectral range of the cavity, the pulse train with repetition rate of 11.39 MHz was obtained with higher signal power based on AMPM, and the serval order harmonic mode-locking states with repetition rate from 22.78 MHz to 45.56 MHz were demonstrated with the appropriate pump frequency.</p>

1.7 Μm Tm-fiber Chirped Pulse Amplification System with Dissipative Soliton Seed Laser.

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

All-polarization-maintaining Mode-Locked Thulium-Doped Femtosecond Laser at 1.7 Μm

396 MHz CPA femtosecond laser system based on a single crystal fiber rod-type amplifier

All-fiber 3.4-W 2.8-µm ultra-short pulse MOPA system seeded by the soliton self-frequency shift of 2-µm pulses

High-power 0.4-mJ picosecond CPA system based on an extra-large-mode-area triple-clad fiber

High power Raman soliton generation at 1.7 μm in all-fiber polarization-maintaining erbium-doped amplifier

Highly Efficient Multiple Watt Gain-Switched 1.7 Μm All-Fiber Laser Pumped by 1.6 Μm Harmonic Dissipative Soliton Resonance Pulses

A large dispersion-managed monolithic all-fiber chirped pulse amplification system for high-energy femtosecond laser generation

Wavelength-Tunable Chirped Pulse Amplification System (1720 nm–1800 nm) Based on Thulium-Doped Fiber

Spectral Compression of a Dispersion-Managed Mode-Locked Tm:Fiber Laser at $1.9~\mu \Text{m}$

High-Powered Millijoule Pulse Energy Tm3+-Doped Fiber Amplifier at 2.05 Mu M

Kilowatt-Level High-Efficiency Narrow-Linewidth All-Fiber Tm3+-Doped Laser

1720nm-1800nm tunable chirped pulse amplification based on thulium-doped fiber

Yb-Doped Fiber Chirped Pulse Amplification System Delivering 1 mJ, 231 fs at 1 kHz Repetition Rate

1.7 μm Tm-doped continue-wave and pulse fibre laser using a modulated pump based on variable pulse generated mechanisms

112-Μj 180-Fs Pulses at 1-Khz Repetition Rate from Yb-Doped Laser Based on Strictly All-Fiber CPA Structure

Ultra-short Pulse Burst Laser Around 1.98 Μm Obtained Through an All-Fiber Nonlinear Wavelength Converter and Tm-doped Fiber Amplifier.

Hybrid CPA system comprised by fiber-silicate glass fiber-single crystal fiber with femtosecond laser power more than 90 W at 1 MHz