Abstract:Hundreds of picosecond pulses amplifier based on Yb-doped tapered fiber can serve as the primary power amplifier stage for an all-fiber and polarization-maintained picosecond pulse laser system. Here, we report a high-power narrow-linewidth amplifier stage by using the Yb-doped tapered fiber. In the regime, we have demonstrated amplification of 201.4 ps pulses centered at 1031.4 nm with a spectral width of 0.54 nm to 105 W average power at a repetition rate of 29.3 MHz. The picosecond pulses had a high beam quality with a measured M2 value of 1.36 ∼ 1.51, and the optical-to-optical conversion efficiency reached 56 %. To the best of our knowledge, this is the first demonstration of a high-power amplifier based on Yb-doped tapered fiber, capable of amplifying hundreds of picosecond pulses beyond the hectowatt-level average power, while maintaining high beam quality. This achievement highlights the immense potential of Yb-doped tapered fiber in the field of picosecond pulse power amplification. At last, we have refined the model for the transmission and amplification of picosecond pulses in Yb-doped tapered optical fibers, thereby enhancing simulation accuracy by 8 % and providing valuable references for the in-depth research of tapered fiber pulse amplifiers.

High-Powered Millijoule Pulse Energy Tm3+-Doped Fiber Amplifier at 2.05 Mu M

High-Power, High-Energy Ho:Yag Oscillator Pumped by A Tm-Doped Fiber Laser

All-Fiber Millijoule Energy and Nanoseconds Pulse Operation of A High Beam Quality Multi-Stage Pulse-Pumped Yb-Doped Amplifier Cascade

In-band pumped, Q-switched thulium-doped fiber laser system delivering 140 W and 7 mJ pulse energy.

Over 8 W High Peak Power Uv Laser with A High Power Q-Switched Nd:Yvo4 Oscillator and the Compact Extra-Cavity Sum-Frequency Mixing

1.06 J pulsed LD end-pumped MSMC Tm: YAG laser

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

High-energy, high-peak-power diode-pumped Q-switched Tm:YAG laser at 2.02 μm with tunable repetition rate from 100 Hz to 1000 Hz

Research on ytterbium-doped photonic crystal fiber amplifier for the femtosecond fiber laser

A 12 Mj 11 Ns Spectrally Narrow Fiber Amplifier with A Pulsed Pump

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

High-energy single-frequency pulsed fiber MOPA at 1064 nm based on a hybrid active-fiber

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

Ultra-short Pulse Burst Laser Around 1.98 Μm Obtained Through an All-Fiber Nonlinear Wavelength Converter and Tm-doped Fiber Amplifier.

11-mJ pulse energy wideband Yb-doped fiber laser

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

Hundreds of picosecond pulses amplifier based on Yb-doped tapered fiber for the generation of 100 W average output power

High Peak Power Picosecond Hybrid Fiber and Solid-State Amplifier System

All-fiber 30-μm core diameter Yb-doped pulse-pumped amplifier cascade generating 10 nm-bandwidth 545 kW peak power pulses

Kilowatt-Level High-Efficiency Narrow-Linewidth All-Fiber Tm3+-Doped Laser

Dual-wavelength single-frequency Tm:ZBLAN fiber amplifier operating at 1.94 and 2.33 μm