Abstract:By focusing on a typical emitting wavelength of 1120 nm as an example, we present the first, to the best of our knowledge, demonstration of a high-efficiency, narrow-linewidth kilowatt-level all-fiber amplifier based on hybrid ytterbium-Raman (Yb-Raman) gains. Notably, two temporally stable, phase-modulated single-frequency lasers operating at 1064 nm and 1120 nm, respectively, were applied in the fiber amplifier, to simultaneously alleviate the spectral broadening of the 1120 nm signal laser and suppress the stimulated Brillouin scattering effect. An over 1 kW narrow-linewidth 1120 nm signal laser was obtained with slope efficiency of ${\sim}{77}\% $∼77% and beam quality of ${\rm M}_x^2\sim {1.25}$Mx2∼1.25, ${\rm M}_y^2 \sim {1.17}$My2∼1.17. The amplified spontaneous emission (ASE) noise in the fiber amplifier was effectively suppressed by incorporating an ASE-filtering system between the seed laser and the main amplifier. Furthermore, the experimental results demonstrate that the spectral linewidth broadening effect is tightly related to the injected power ratios between the two seed lasers. Overall, this setup could provide a reference on obtaining and optimizing high-power narrow-linewidth fiber lasers operating in the long wavelength extreme of the Yb gain spectrum.

All-fiber 30-μm core diameter Yb-doped pulse-pumped amplifier cascade generating 10 nm-bandwidth 545 kW peak power pulses

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

11-mJ pulse energy wideband Yb-doped fiber laser

High energy, single-polarized, single-transverse-mode, nanosecond pulses generated by a multi-stage Yb-doped photonic crystal fiber amplifier

Hundreds of picosecond pulses amplifier based on Yb-doped tapered fiber for the generation of 100 W average output power

A 12 Mj 11 Ns Spectrally Narrow Fiber Amplifier with A Pulsed Pump

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

Multi-stage ytterbium fiber-amplifier seeded by a gain-switched laser diode

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

Single Mode Mopa Structured All-Fiber Yb Pulse Fiber Amplifier at Low Repetition

All-Fiber Millijoule Energy and Nanoseconds Pulse Operation of A High Beam Quality Multi-Stage Pulse-Pumped Yb-Doped Amplifier Cascade

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

700 W single-frequency all-fiber amplifier at 1064 nm with kHz-level spectral linewidth

Yb-Doped Fiber Chirped Pulse Amplification System Delivering 1 mJ, 231 fs at 1 kHz Repetition Rate

670 Kw Nanosecond All-Fiber Super-Irradiation Pulsed Amplifiers at High Repetition Rates

Pulse shaping, high average power narrow linewidth Er, Yb co-doped fiber amplifier

Kilowatt-level ytterbium-Raman fiber amplifier with a narrow-linewidth and near-diffraction-limited beam quality

All-fiber single frequency pulsed amplifier with 412 W peak power output operating at 1030 nm