Abstract:Electronic products and systems are widely used in industrial network systems, control devices, and data acquisition devices across many industry sectors. Failures of such electronic systems might lead to unexpected downtime, loss of productivity, additional work for repairs, and delay in product and service development. Thus, developing an appropriate sensing technique is necessary, because it is the first step in system fault diagnosis and prognosis. Many sensing techniques often require external and additional sensing devices, which might disturb system operation and consequently increase operating costs. In this study, we present an on-chip health sensing method for non-destructive and non-invasive interconnect degradation detection. Bit error rate (BER), which represents data integrity during digital signal transmission, was selected to sense interconnect health without connecting external sensing devices. To verify the health sensing performance, corrosion tests were conducted with in situ monitoring of the BER and direct current (DC) resistance. The eye size, extracted from the BER measurement, showed the highest separation between the intact and failed interconnect, as well as a gradual transition, compared with abrupt changes in the DC resistance, during interconnect degradation. These experimental results demonstrate the potential of the proposed sensing method for on-chip interconnect health monitoring applications without disturbing system operation.

An On-chip Path Delay Measurement Sensor for Aging Monitoring

A New Aging Sensor for the Detection of Recycled ICs

Sensor-Driven Reliability and Wearout Management

An Aging Fault Prediction Sensor Circuit Based Guardband Violation

A Fast Aging-aware Static Timing Analysis Prediction Frame of Digital Integrated Circuits

Concurrent device/circuit aging for general reliability simulations

A Dynamic Time Evolution Method for Concurrent Device-Circuit Aging Simulations

Aging-Aware Gate-Level Modeling for Circuit Reliability Analysis

Research on Aging State Prediction Method of Computing Chip System

Compact Modeling and Simulation of Accelerated Circuit Aging

New Insight into the Aging Induced Retention Time Degraded of Advanced DRAM Technology

Novel Critical Gate-Based Circuit Path-Level NBTI-Aware Aging Circuit Degradation Prediction.

A universal delay line circuit for variation resilient IC with self-calibrated time-to-digital converter

Implementation of Aging Mechanism Analysis and Prediction for XILINX 7-Series FPGAs with a 28-nm Process

Fast Aging-Aware Timing Analysis Framework with Temporal-Spatial Graph Neural Network

A Random Delay Injection Based Clock Domain Crossing Verification Method

An On-Chip Circuit For Timing Measurement Of Sram Ip

Development of a Non-Invasive On-Chip Interconnect Health Sensing Method Based on Bit Error Rates

On-Chip Concurrent Device Aging Prognosis and Dielectric Failure Detection for GaN Power Devices

Design and Implementation of a High-resolution SRAM Timing Parameters Measuring Circuit

A Novel Converter-level Si Material Degradation Monitoring Method Based on the DC Bus Leakage Current