Abstract:In this study, the authors provide an improved and updated comprehension on Silicon Carbide (SiC) Gate Turn‐off (GTO)'s turn‐on transient by means of integrated muti‐cell TCAD simulations. By means of the physical characterization conducted in this paper, the physical mechanisms dominating chip device's current inhomogeneity are uncovered in depth, and the method of enhancing the current homogeneity among cells is proposed and extensively discussed. Furthermore, based on the conducted analysis above, the most possible reason for the extremely current rising transient during the initial pulsed current stage of SiC GTO thyristor is subsequently speculated and experimentally verified. Silicon Carbide (SiC) Gate Turn‐off (GTO) thyristor is regarded as a promising option for pulsed power applications; however, the formation of high di/dt has been constrained by the slow current rise transient phase and the turn‐on current heterogeneity over the chip device. In this paper, a practical integrated multi‐cell simulation is performed to physically characterize the turn‐on transient of SiC GTO thyristor. Through examining electrical coupling between adjacent cells caused by both parasitics of electrode metallization and carrier travelling via SiC, the current distributions are observed, and the carrier transport dynamics are analyzed in detail. Furthermore, physical mechanisms dominating the current heterogeneity among multi‐cells are discovered in depth. It is revealed that the current heterogeneity during the turn‐on transient is primarily resulted from the Gate signal delay caused by the Gate Runner metallization, and the lateral interaction from adjacent semiconductor regions adds to this inhomogeneity; however, this situation can be improved once the electrical distance between each Anode contact and the Anode electrode gets lowered. Design method for turn‐on performance improvement is also proposed accordingly. Besides, based on the analysis conducted on the multi‐cell simulation results, the possible reason of the extremely slow current rise transient phase is speculated and experimentally verified. The improvement in the comprehension of SiC GTO's turn‐on transient, which cannot be obtained from the traditional investigation from the viewpoint of one elementary cell, will provide guiding principles helping in directing future efforts to advance the improvement of device design technology.

A Compact Spice Model for SiC Gate Turn-Off Thyristors with Complete Parameter Extraction Procedure

A Complete Composite GTO Model for Circuit Simulations

A New Extraction Method of GaN Switch-Hemt Small-Signal Model with Capacitance Scanning Algorithm

A Novel Compact Model of Gate Capacitance for SiC MOSFET with Easy Parameter Extraction Method

Capacitor Switched Gate-Turnoff Thyristor

Dynamic Gate Capacitance Model for Switching Transient Analysis in P-GaN Gate HEMTs

Physical insight into turn‐on transient of silicon carbide gate turn‐off thyristor

Ultra-high voltage 4H-SiC gate turn-off thyristor for low switching time

Electric-Magnetic-Thermal Co-simulation Method for SiC Gate Turn-off Thyristor Module

IGCT Circuit Model Based on Pspice Modeling Platform

Principle-electrics Model of IGCT and Dynamic Characteristic Simulation

12.5 Kv SiC Gate Turn off Thyristor with Trench-Modulated JTE Structure

10-kV 4H-SiC Gate Turn-OFF Thyristors With Space-Modulated Buffer Trench Three-Step JTE

Novel Methodology for Fast Model Parameter Extracting Using $q_{\mathrm{g}}$ Waveforms to Accurately Capture Switching Characteristics of SiC MOSFET under Various Load Conditions

A composite gate turn-off thyristor model and its application

Physics-based Compact Model of Integrated Gate-Commutated Thyristor with Multiple Effects for High-Power Application

Modeling of SiC MOSFET with temperature dependent parameters and its applications

A Datasheet-Driven Nonsegmented Empirical SPICE Model of SiC MOSFET with Improved Accuracy and Convergence Capability

Characterization and Modeling of a 1.2-kV 30-A Silicon-Carbide MOSFET

A Design Model of Soft Turn-off Protection for SiC MOSFETs

A Temperature-Dependent SiC MOSFET Modeling Method Based on MATLAB/Simulink