Abstract:A novel dual injection enhanced planar gate insulated gate bipolar transistor (IGBT) with self-adaptive hole path (DIE-PIGBT) is proposed. A floating-P region is applied behind the emitter-connected deep trench in z direction and contacted with the N-type carrier stored (N-CS) layer for the proposed IGBT. Compared to the conventional trench shielded planar gate IGBT (CTS-PIGBT), the proposed device further alleviates the negative impact of the N-CS layer on the breakdown voltage (BV) and reduces both the on-state voltage drop (V (ceon)) and saturated collector current density (J (sat)). Simulation results show that with the same device thickness of 400 mu m, the BV are 4625 V and 4275 V for the proposed and conventional device, respectively. The V (ceon) at 75 A cm(-2) is 2.51 V for the proposed DIE-PIGBT, which is 1.13 V lower than that of the CTS-PIGBT. Furthermore, with similar BV to the conventional one, the device thickness can be reduced to 355 mu m for the DIE-PIGBT. Pro. The total gate charge (Q (G)) and miller plateau charge (Q (GC)) for the proposed device are reduced by 61.0% and 89.9%, respectively. As a result, the proposed structure has better trade-off relationship between the V (ceon) and turn-off loss (E (off)). At the same V (ceon) of 2.51 V, the E (off) for the DIE-PIGBT and DIE-PIGBT. Pro are 45.17 mJ cm(-2) and 41.01 mJ cm(-2), which is reduced by 44.0% and 49.1% when compared to 80.61 mJ cm(-2) of the CTS-PIGBT, respectively. Moreover, the J (sat) is reduced from 619 A cm(-2) for the CTS-PIGBT to 368 A cm(-2) for the DIE-PIGBT under the V (ge) of 15 V. The short-circuit withstand time of the DIE-PIGBT is 1.9 times larger than that of the conventional device.

Injection Enhanced SiC Planar Gate IGBT with Partial Schottky Contact Emitter

A Novel High Performance 6500V IGBT with P-type Schottky Contact

A Novel 3300V Conductivity Modulation Enhanced IGBT with P-type Schottky Contact and Partial N-type Buried Layer

A New SiC Planar-Gate IGBT for Injection Enhancement Effect and Low Oxide Field

Dual Injection Enhanced Planar Gate IGBT with Self-Adaptive Hole Path for Better Trade-off and Higher SOA Capability

Exploring SiC Planar IGBTs Towards Enhanced Conductivity Modulation Comparable to SiC Trench IGBTs

Cell Design Consideration in SiC Planar IGBT and Proposal of New SiC IGBT with Improved Performance Trade-Off

A Hybrid-Channel Injection Enhanced Modulation 4H-SiC IGBT Transistors With Improved Performance

A Novel High Voltage Low Loss Planar Gate IGBT with Improved P-Body Region

Gate Structure Design of SiC Trench IGBTs for Injection-Enhancement Effect

The Injection Efficiency Controlled IGBT

New Improvement Results on 7.5 Kv 4H-Sic P-Igbts with R<sub>diff, On</sub> of 26 M&#x003a9;·cm<sup>2</sup> at 25&Amp;#x000b0;c

A Light-Emitting-Diodes-Integrated Silicon Carbide Insulated Gate Bipolar Transistor

A novel 4H–SiC IGBT with double gate PMOS for improving the switch controllability and FBSOA

New Improvement Results On 7.5 Kv 4h-Sic P-Igbts With R-Diff,R- On Of 26 M Omega-Cm(2) At 25 Degrees C

SiC Trench IGBT with Diode-Clamped P-Shield for Oxide Protection and Enhanced Conductivity Modulation

A Novel High Voltage SOI LIGBT with Split Gate and Carrier Stored Layer

A planar SJ IGBT with plugged p+ collector

Design and Characterization of High-Voltage 4H-Sic P-Igbts

Enhanced Conduction Characteristics in SiC IGBT with Floating P-Grid Shielded Thick Current Storage Layer

Superjunction IGBT With Conductivity Modulation Actively Controlled by Two Separate Driving Signals