Abstract:High-voltage p-channel 4H-SiC insulated gate bipolar transistors (IGBTs) have been fabricated and characterized. The devices have a forward voltage drop of 7.2 V at 100 A/cm2 and a -16 V gate bias at 25 'C, corresponding to a specific on-resistance of 72 run. CM2 and a differential on-resistance of 26mQ - CM2. Hole mobility of 12 CM2/V. s in the inversion channel with a threshold voltage of -6 V was. achieved by optimizing the n+ well doping profile and gate oxidation process. A novel current enhancement layer was adopted to reduce the KET resistance and enhance conductivity modulation by improving hole current spreading and suppressing the electron current conduction through the top n-p-n transistor. Inductive switching results have shown that the p-IGBT exhibited a turn-off time of -1 ps and a turn-off energy loss of 12 mj at 4-kV dc-link voltage and 6-A load current at 25 'C. The turn-off trajectory from the measured inductive load switching waveforms and numerical simulations shows that the p-IGBT had a near-square reverse bias safe operating area. Numerical simulations have been conducted to achieve an improved tradeoff betweenforward voltage drop and switching off energy by investigating the effects of drift layer lifetime and p-buffer layer parameters. The advantages of SiC p-IGBTs, such as the potential of very low ON-state resistance, slightly positive temperature coefficient, high switching speed, small switching losses, and large safe operating area, make them suitable and attractive for high-power high-frequency applications.

New Improvement Results on 7.5 Kv 4H-Sic P-Igbts with R<sub>diff, On</sub> of 26 M&#x003a9;·cm<sup>2</sup> at 25&Amp;#x000b0;c

New Improvement Results On 7.5 Kv 4h-Sic P-Igbts With R-Diff,R- On Of 26 M Omega-Cm(2) At 25 Degrees C

Design and Characterization of High-Voltage 4H-Sic P-Igbts

Design and Characterization of 10 kV High Voltage 4H-SiC p-Channel IGBTs with Low VF

A Hybrid-Channel Injection Enhanced Modulation 4H-SiC IGBT Transistors With Improved Performance

1.4 kV, 25 A, PT and NPT trench IGBTs with optimum forward characteristics

Low Ron,sp.diff and Ultra-high Voltage 4H-Sic N-Channel IGBTs with Carrier Lifetime Enhancement Process

Optimum Design of 1.4kv Non-Punch-Through Trench Igbts: the Next Generation of High-Power Switching Devices

Optimum design of 1.4 kV trench IGBTs-the next generation of high power switching devices

A novel 4H–SiC IGBT with double gate PMOS for improving the switch controllability and FBSOA

A Novel 4H–SiC/Si Heterojunction IGBT Achieving Low Turn–Off Loss

A Novel High Performance 6500V IGBT with P-type Schottky Contact

Low Turn-Off Loss 4H-Sic Insulated Gate Bipolar Transistor with a Trench Heterojunction Collector

A novel 4H-SiC IGBT structure with improved trade-off between short circuit capability and on-state voltage drop

Thin-drift-layer n-channel 4H-SiC IGBT with low switching loss and switching ringing reduction

Injection Enhanced SiC Planar Gate IGBT with Partial Schottky Contact Emitter

Bidirectional Current 4h‐sic VJFET

A New SiC Planar-Gate IGBT for Injection Enhancement Effect and Low Oxide Field

Cell Design Consideration in SiC Planar IGBT and Proposal of New SiC IGBT with Improved Performance Trade-Off

Design and Investigation of Frequency Capability of 15kv 4H-Sic Igbt

A Novel 3300V Conductivity Modulation Enhanced IGBT with P-type Schottky Contact and Partial N-type Buried Layer

New Improvement Results on 7.5 Kv 4H-Sic P-Igbts with R&lt;sub&gt;diff, On&lt;/sub&gt; of 26 M&amp;#x003a9;·cm&lt;sup&gt;2&lt;/sup&gt; at 25&Amp;#x000b0;c