Abstract:One prerequisite for the large-scale application of biodegradable polymers is the manipulation of macroscopic performances of commercially available biopolymers during processing according to different real service requirements. Herein, the microstructural evolution of poly(butylene adipate-co-butylene terephthalate) (PBAT) modified by chain extender during film blowing was investigated by in situ synchrotron radiation X-ray scattering to unveil the origin of different performances. The chain dynamics difference induced by the chain extender was first characterized by the rheological measurement and 1H Multiple Quantum (MQ) NMR. It shows that the terminal relaxation is significantly slowed down, while the locally segmental dynamics is not apparently changed. With the assistance of the custom-built film blowing apparatus, the microstructure right above the die exit (D = 13-165 mm) was in situ, simultaneously captured by small- and wide-angle scattering (SAXS/WAXS), where four distinct regimes can be defined. Only the PBAT melt signals are found in regime I, whereas the formation of the mesomorphic domains as shown by the SAXS streaks appearing in regime II. The crystal shows up in regime III, where the WAXS signal appears. A dramatic increment of the crystallinity is found in regime III, which contributes to the continuous increasing bubble modulus with the formation of the crystal-based network. Such a crystal-based network is filled with crystals in regime IV, where the diameter of the PBAT bubble remains constant. The addition of the chain extender is found to significantly influence the structural evolution within different regimes. These dynamics and structure information could supply general guidance for bubble stability improvement and modification of macroscopic performances of biodegradable polymer products.

Impacts of chain extenders on thermal property, degradation, and rheological performance of poly(butylene adipate-co-terephthalate)

Synthesis and Thermomechanical and Rheological Properties of Biodegradable Long-Chain Branched Poly(Butylene Succinate-Co-Butylene Terephthalate) Copolyesters

Effect of chain extender on the morphological, rheological and mechanical properties of biodegradable blends from PBAT and P34HB

Effect of Carbon Black and Chain Extender on Thermal, Rheological and Mechanical Properties of Fully Biodegradable Poly(butylene Adipate‐co‐terephthalate)/poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) Blends

Manipulation of Chain Entanglement and Crystal Networks of Biodegradable Poly(butylene Adipate-Co-butylene Terephthalate) During Film Blowing Through the Addition of a Chain Extender: an in Situ Synchrotron Radiation X-ray Scattering Study.

The Effects of Chain-Extending Cross-Linkers on the Mechanical and Thermal Properties of Poly(butylene adipate terephthalate)/Poly(lactic acid) Blown Films

Effect of multi-functional epoxy chain extender on the weathering resistance performance of Poly(butylene adipate-co-terephthalate) (PBAT)

Effect of Copolymerized Butylene Terephthalate Chains on Polymorphism and Enzymatic Degradation of Poly(Butylene Adipate)

Effect of chain extender on morphologies and properties of PBAT/PLA composites

Branching and Cross-Linking of Poly(ethylene Terephthalate) and Its Foaming Properties

Fabrication and Properties of Modified Poly(butylene Terephthalate) with Two‐Step Chain Extension

Enhancement of physical properties of thermoplastic polyether-ester elastomer by reactive extrusion with chain extender

Effect of Chain Extension on Processability and Mechanical Properties of Poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

Chain Extension Of Poly(Butylene Terephthalate) By Reactive Extrusion

Thermal, mechanical and physical properties of chain extended recycled polyamide 6 via reactive extrusion: Effect of chain extender types

Effect of Chain Extender on Hydrogen Bond and Microphase Structure of Biodegradable Thermoplastic Polyurethanes

Influence on Blown Film Extrusion of Polyethylene Terephthalate with Chain Extenders

Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate's Properties

Synthesis and Characterization of Chain Extended Poly (butylene Adipate-Co-butylene Terephthalate)

The Investigation of the Toughening Mechanism of PHBV/PBAT with a Novel Hyperbranched Ethylenediamine Triazine Polymer Based Modifier: the Formation of the Transition Layer and the Microcrosslinking Structure

Process-Induced Morphology of Poly(Butylene Adipate Terephthalate)/Poly(Lactic Acid) Blown Extrusion Films Modified with Chain-Extending Cross-Linkers