Abstract:Compression and resilience mechanism of the LCBPP/TPEE/PTFE foam. The reduced permanent strain of the foam and the increased compression strength of the modified LCBPP compared with pure LCBPP foam were attributed to the presence of TPEE and PTFE fibers in the foam. Excellent resilience and compression resistance are the key characteristics of cushioning and water–oil separation materials. Although polypropylene (PP) offers excellent performance and affordability of PP, it exhibits poor resilience. To address this shortcoming, polymer blends with long‐chain branched PP (LCBPP), thermoplastic polyester elastomer (TPEE), and polytetrafluoroethylene (PTFE) were prepared via melt blending, and their mechanical properties were tested. The LCBPP/TPEE/PTFE composites were subjected to physical foaming using supercritical CO2 (scCO2) as the blowing agent. The synergistic toughening mechanism of the elastomer/nanofiber and the effect of the structure and crystallization of the dispersed phase on the foam resilience and foam compression strength were investigated. The results revealed that fibrous PTFE and spherical TPEE formed a composite dispersed phase in LCBPP. The impact and tensile strengths of the unfoamed LCBPP were found to have been simultaneously optimized owing to the synergistic effect of the elastomeric toughening of TPEE and the reinforcement of the PTFE fiber–induced fibrous crystal structure. Compared with pure LCBPP, the impact strength of the LCBPP/TPEE/PTFE composite increased by 216%, whereas its tensile strength decreased by only 6%. In particular, the synergistic effect of TPEE/PTFE improved the resilience and compression strength of the LCBPP foam. Compared with the pure LCBPP foam, the permanent strain of the LCBPP/TPEE/PTFE foam was reduced by 13.8% after five cycles of compression and its compression strength increased by 27.3%. The experimental results of our study could be used to prepare LCBPP foams with exceptional resilience, high compression strength, and good application prospects.

An Ultra-High Volume Expansion Ratio and No-Shrinkage Poly(Butylene Adipate-co-Terephthalate) Foam: Compression and Resilience Properties

Synthesis and Thermomechanical and Rheological Properties of Biodegradable Long-Chain Branched Poly(Butylene Succinate-Co-Butylene Terephthalate) Copolyesters

Superior Gas Barrier Properties of Biodegradable PBST vs. PBAT Copolyesters: A Comparative Study

High-Strength Bio-Degradable Polymer Foams with Stable High Volume-Expansion Ratio Using Chain Extension and Green Supercritical Mixed-Gas Foaming

Foaming Behaviors of Poly (butylene Adipate-Co-terephthalate) with Methyl Methacrylate-Co-glycidyl Methacrylate As Chain Extender

Dynamic Cross-linked Poly(butylene adipate- co -terephthalate) for High-Performance Green Foam

A Novel Method for Preparing Microcellular PBAT/GNPs Foam with High Volume Expansion Ratio: Effect of Vacuum Foaming

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

The effect of free radical initiators on poly (butylene adipate-co-terephthalate) (PBAT) and its foaming performance

Fabrication of Soft Biodegradable Foam with Improved Shrinkage Resistance and Thermal Stability

Polybutylene adipate terephthalate/polylactic acid interface enhanced compatibilization and its bead-foaming characteristics

Strategy for the Preparation of PBAT/Starch Blended Foam with High Resilience and Shrinkage Resistance

Green preparation of poly (butylene succinate-co-butylene terephthalate) foam with tunable degradability and mechanical properties by supercritical CO2

Preparation of shrink-resistant environmentally friendly foam

Adsorption characteristics of amphiphilic open-cell poly(butylene succinate) foams with ultrahigh porosity

Impacts of chain extenders on thermal property, degradation, and rheological performance of poly(butylene adipate-co-terephthalate)

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Biodegradable and Ultra-High Expansion Ratio PPC-P Foams Achieved by Microcellular Foaming Using CO2 as Blowing Agent

Synergistic effect of thermoplastic polyester elastomer and polytetrafluoroethylene in situ fibrillation on the resilience and compression strength of long‐chain branched polypropylene foam

Synthesis and characterization of biobased poly(butylene adipate‐co‐furandicarboxylate) with excellent gas barrier properties

Reinforcing a Thermoplastic Starch/Poly(butylene adipate-co-terephthalate) Composite Foam with Polyethylene Glycol under Supercritical Carbon Dioxide