Abstract:One prerequisite for the large-scale application of biodegradable polymers is the manipulation of macroscopic performances of commercially available biopolymers during processing according to different real service requirements. Herein, the microstructural evolution of poly(butylene adipate-co-butylene terephthalate) (PBAT) modified by chain extender during film blowing was investigated by in situ synchrotron radiation X-ray scattering to unveil the origin of different performances. The chain dynamics difference induced by the chain extender was first characterized by the rheological measurement and 1H Multiple Quantum (MQ) NMR. It shows that the terminal relaxation is significantly slowed down, while the locally segmental dynamics is not apparently changed. With the assistance of the custom-built film blowing apparatus, the microstructure right above the die exit (D = 13-165 mm) was in situ, simultaneously captured by small- and wide-angle scattering (SAXS/WAXS), where four distinct regimes can be defined. Only the PBAT melt signals are found in regime I, whereas the formation of the mesomorphic domains as shown by the SAXS streaks appearing in regime II. The crystal shows up in regime III, where the WAXS signal appears. A dramatic increment of the crystallinity is found in regime III, which contributes to the continuous increasing bubble modulus with the formation of the crystal-based network. Such a crystal-based network is filled with crystals in regime IV, where the diameter of the PBAT bubble remains constant. The addition of the chain extender is found to significantly influence the structural evolution within different regimes. These dynamics and structure information could supply general guidance for bubble stability improvement and modification of macroscopic performances of biodegradable polymer products.

Chain Extension Of Poly(Butylene Terephthalate) By Reactive Extrusion

Chain Extension of Polyester PBT with Epoxide Resin

Fabrication and Properties of Modified Poly(butylene Terephthalate) with Two‐Step Chain Extension

Properties of Poly(butylene Terephthalate) Chain‐extended by Epoxycyclohexyl Polyhedral Oligomeric Silsesquioxane

Branching and Cross-Linking of Poly(ethylene Terephthalate) and Its Foaming Properties

Impacts of chain extenders on thermal property, degradation, and rheological performance of poly(butylene adipate-co-terephthalate)

Chain extension of PA1010 by reactive extrusion by diepoxide 711 and diepoxide TDE85 as chain extenders

Enhancement of physical properties of thermoplastic polyether-ester elastomer by reactive extrusion with chain extender

Effect of chain extender on the morphological, rheological and mechanical properties of biodegradable blends from PBAT and P34HB

Toughening of Poly (butylene Terephthalate) with Epoxy-Filled Poly (ethylene–octene) Copolymer

Application of Macromolecular Chain Extender and Contribution to the Toughening of Poly(Ethylene Terephthalate)

Manipulation of Chain Entanglement and Crystal Networks of Biodegradable Poly(butylene Adipate-Co-butylene Terephthalate) During Film Blowing Through the Addition of a Chain Extender: an in Situ Synchrotron Radiation X-ray Scattering Study.

Chain Extension of Polybutylene Adipate and Polybutylene Succinate with Adipoyl‐ and Terephthaloyl‐biscaprolactamate

Effect of Chain Extension on Processability and Mechanical Properties of Poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

Influence on Blown Film Extrusion of Polyethylene Terephthalate with Chain Extenders

Synthesis and Characterization of Chain Extended Poly (butylene Adipate-Co-butylene Terephthalate)

Effect of Chain Extender on Hydrogen Bond and Microphase Structure of Biodegradable Thermoplastic Polyurethanes

Effect of Carbon Black and Chain Extender on Thermal, Rheological and Mechanical Properties of Fully Biodegradable Poly(butylene Adipate‐co‐terephthalate)/poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) Blends

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Thermal, mechanical and physical properties of chain extended recycled polyamide 6 via reactive extrusion: Effect of chain extender types

Chain structure and thermal behavior of reactive blends of poly(ethylene terephthalate)/poly(butylene terephthalate) by addition of 2,2′-(1,4-phenyl) bisoxazoline