Chain Extension of Adipic Acid and (or) Succinic Acid/butanediol Polyesters with 2,2′‐(1,4‐phenylene)‐bis(2‐oxazoline) and Adipoylbiscaprolactamate Combined Chain Extenders

Shao Yi Xu,Yan Hong Shi,Jing Bo Zhao,Sheng Ling Jiang,Wan Tai Yang
DOI: https://doi.org/10.1002/pat.1771
IF: 3.348
2010-01-01
Polymers for Advanced Technologies
Abstract:This paper provided an easy and flexible method to synthesize high molecular weight polyesters by polycondensation and chain extension. Low molecular weight polybutylene adipate, polybutylene succinate, and poly(butylene succinate-co-butylene adipate) (PBSA) were synthesized through melt condensation polymerization from adipic acid and/or succinic acid with butanediol. The prepolyesters obtained had different amount of -COOH and -OH terminal groups. Chain extension of them was carried out at 180-240 degrees C using 2,2'-(1,4-phenylene)-bis(2-oxazoline) and adipoyl biscaprolactamate as combined chain extenders. The influencing factors of the chain extension were studied. At the optimal conditions, chain-extended polybutylene adipate with M(n) up to 39,100, polybutylene succinate with intrinsic viscosity of 0.99 dl/g, and PBSA with intrinsic viscosity from 0.73 to 0.81 dl/g were synthesized. The chain-extended polyesters were characterized by IR spectrum, (1)H NMR spectrum, differential scanning calorimetry, thermogravimetric analysis (TGA), wide angle X-ray scattering, and tensile test. The thermal analysis showed that chain extension often led to slight decrease of the regularity, the crystallinity, and the melting point. This deterioration of the properties is not harmful enough to impair their thermal properties and obstruct them from being used as biodegradable thermoplastics. The TGA showed that the chain-extended polyesters were stable with initial decomposition temperature over 354.7 degrees C. The tensile strength of the chain extended PBS and PBSAs with butylene adipate units less than 20 mol% was in the range of 18.95-31.22 MPa. Copyright (C) 2010 John Wiley & Sons, Ltd.
What problem does this paper attempt to address?