Abstract:This paper provided an easy and flexible method to synthesize high molecular weight polyesters by polycondensation and chain extension. Low molecular weight polybutylene adipate, polybutylene succinate, and poly(butylene succinate-co-butylene adipate) (PBSA) were synthesized through melt condensation polymerization from adipic acid and/or succinic acid with butanediol. The prepolyesters obtained had different amount of -COOH and -OH terminal groups. Chain extension of them was carried out at 180-240 degrees C using 2,2'-(1,4-phenylene)-bis(2-oxazoline) and adipoyl biscaprolactamate as combined chain extenders. The influencing factors of the chain extension were studied. At the optimal conditions, chain-extended polybutylene adipate with M(n) up to 39,100, polybutylene succinate with intrinsic viscosity of 0.99 dl/g, and PBSA with intrinsic viscosity from 0.73 to 0.81 dl/g were synthesized. The chain-extended polyesters were characterized by IR spectrum, (1)H NMR spectrum, differential scanning calorimetry, thermogravimetric analysis (TGA), wide angle X-ray scattering, and tensile test. The thermal analysis showed that chain extension often led to slight decrease of the regularity, the crystallinity, and the melting point. This deterioration of the properties is not harmful enough to impair their thermal properties and obstruct them from being used as biodegradable thermoplastics. The TGA showed that the chain-extended polyesters were stable with initial decomposition temperature over 354.7 degrees C. The tensile strength of the chain extended PBS and PBSAs with butylene adipate units less than 20 mol% was in the range of 18.95-31.22 MPa. Copyright (C) 2010 John Wiley & Sons, Ltd.

Chain Extension of Polyester PBT with Epoxide Resin

Chain Extension Of Poly(Butylene Terephthalate) By Reactive Extrusion

Properties of Poly(butylene Terephthalate) Chain‐extended by Epoxycyclohexyl Polyhedral Oligomeric Silsesquioxane

Fabrication and Properties of Modified Poly(butylene Terephthalate) with Two‐Step Chain Extension

Impacts of chain extenders on thermal property, degradation, and rheological performance of poly(butylene adipate-co-terephthalate)

Chain extension of PA1010 by reactive extrusion by diepoxide 711 and diepoxide TDE85 as chain extenders

Branching and Cross-Linking of Poly(ethylene Terephthalate) and Its Foaming Properties

Application of Macromolecular Chain Extender and Contribution to the Toughening of Poly(Ethylene Terephthalate)

Thermal, mechanical and physical properties of chain extended recycled polyamide 6 via reactive extrusion: Effect of chain extender types

Enhancement of physical properties of thermoplastic polyether-ester elastomer by reactive extrusion with chain extender

Synthesis and Characterization of Chain Extended Poly (butylene Adipate-Co-butylene Terephthalate)

Chain Extension of Adipic Acid and (or) Succinic Acid/butanediol Polyesters with 2,2′‐(1,4‐phenylene)‐bis(2‐oxazoline) and Adipoylbiscaprolactamate Combined Chain Extenders

Chain extension of PA1010 by bisoxazolines

Influence on Blown Film Extrusion of Polyethylene Terephthalate with Chain Extenders

Molecular Structure of Chain-Extended Poly(Ethylene Terephthalate)

Effect of chain extender on the morphological, rheological and mechanical properties of biodegradable blends from PBAT and P34HB

Simultaneous Improvement of the Processability and Mechanical Properties of Polyamide-6 by Chain Extension in Extrusion

Chain Extension of Recycled PET with Bisoxazoline Chain Extenders

Synthesis of Epoxy-chain Extender and the Chain Extension Effect on the Recycled PET in Reactive Extruding

A Strategy Towards Simultaneously Improving Strength and Processability of Polyamide 6 Using Bespoke Dynamic Covalent Chain Extender

Chain Extension of Polybutylene Adipate and Polybutylene Succinate with Adipoyl‐ and Terephthaloyl‐biscaprolactamate