Abstract:The effect of doping with alkaline-earth metal cations (A = Ca, Sr and Ba) on the crystal structures of tungsten-doped ferrite-based perovskites (Pr(0.5)A(0.5)Fe(0.9)W(0.1)O(3-delta), PAFW, denoted as PCaFW, PSrFW and PBaFW) as the symmetric electrodes for symmetric solid oxide fuel cells (SSOFCs) was investigated. The phase structure, chemical compatibility and thermal expansion with La0.8Sr0.2Ga0.8Mg0.2O3-delta (LSGM), and electrical conductivity and electrochemical performance in the hydrogen oxidation reduction (HOR) and oxygen reduction reaction (ORR) were carefully investigated. The conclusions show that the divalent alkaline earth metal affects the phase stability under reducing atmospheres, thermal properties and electrochemical performance. PSrFW exhibited excellent electrochemical performance compared to PCaFW, while PCaFW displayed in situ exsolution behavior under reducing atmospheres. To evaluate these materials as symmetric electrodes for solid oxide fuel cells, symmetric cells (PAFW|LSGM|PAFW) were used to investigate the mechanisms of the hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR) under different reducing and oxidizing atmospheres. The conclusions show that the adsorption and dissociation processes of the surface oxygen and hydrogen adsorption and dissociation are the rate-limiting steps under oxidizing and reducing conditions. Finally, the electrochemical performances (including cell performance, long-term stability and redox stability) of the two candidate samples were also investigated systematically. All conclusions exhibit that the divalent alkaline earth metal has an evident impact on the electro-catalytic activity and electrochemical performance.

Electrochemical performance and distribution of relaxation times analysis of tungsten stabilized La0 center dot 5Sr0 center dot 5Fe0 center dot 9W0 center dot 1O3-d electrode for symmetric solid oxide fuel cells

A highly stable of tungsten doped Pr0.6Sr0.4Fe0.9W0.1O3-δ electrode for symmetric solid oxide fuel cells

Further Optimization of the Properties of Pr0.6Sr0.4Fe0.9W0.1O3-δ by Cu-doping As Symmetric Electrodes for Solid Oxide Fuel Cells

Characterization of Pr0.5A0.5Fe0.9W0.1O3-δ (A = Ca, Sr and Ba) as Symmetric Electrodes for Solid Oxide Fuel Cells

Characterization of Pr(0.5)A(0.5)Fe(0.9)W(0.1)O(3-delta) (A = Ca, Sr and Ba) as symmetric electrodes for solid oxide fuel cells

Titanium-substituted Lanthanum Strontium Ferrite As a Novel Electrode Material for Symmetrical Solid Oxide Fuel Cell

Stability Investigation for Symmetric Solid Oxide Fuel Cell with La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δElectrode

Electrochemical Stability of La0.6Sr0.4Co0.2Fe0.8O3−δ-infiltrated YSZ Oxygen Electrode for Reversible Solid Oxide Fuel Cells

Reduced-temperature Redox-Stable LSM As a Novel Symmetrical Electrode Material for SOFCs

Electrochemical Performance and Stability of Sr-doped LaMnO 3 -Infiltrated Yttria Stabilized Zirconia Oxygen Electrode for Reversible Solid Oxide Fuel Cells

Electrochemical Performance and Stability of Lanthanum Strontium Cobalt Ferrite Oxygen Electrode with Gadolinia Doped Ceria Barrier Layer for Reversible Solid Oxide Fuel Cell

A Cobalt-Free Electrode Material La0.5Sr0.5Fe0.8Cu0.2O3 − Δ for Symmetrical Solid Oxide Fuel Cells

Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte

Cerium and ruthenium co-doped La<sub>0.7</sub>Sr<sub>0.3</sub>FeO3- as a high-efficiency electrode for symmetrical solid oxide fuel cell

Cobalt–free La0.5Sr0.5Fe0.9Mo0.1O3– Electrode for Symmetrical SOFC Running on H2 and CO Fuels

Tuning Layer-Structured La0.6sr1.4mno4+Delta Into A Promising Electrode For Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells Through Surface Modification

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

La0.7Sr0.3Fe0.7Ga0.3O3-delta as electrode material for a symmetrical solid oxide fuel cell

Engineering a High-Performance W-doped Sr 0.9 Fe 0.67 Ti 0.3 Co 0.03 O 3-Δ Hydrogen Electrode for Solid Oxide Electrolysis Cells (Soecs)

Evaluation of La x Sr 2−x FeO 4 layered perovskite as potential electrode materials for symmetrical solid oxide fuel cells

Sc-substituted La0.6Sr0.4FeO3−δ Mixed Conducting Oxides As Promising Electrodes for Symmetrical Solid Oxide Fuel Cells