Abstract:Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (PSCFNx, x=0.1,0.2) catalysts are prepared and utilized as electrodes in symmetric solid oxide fuel cells (SOFCs) for hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR). Although, the PSCFNx cathode retains its perovskite phase during operation in SOFCs, the anode is totally decomposed and decorated with exsolved metallic Ni-Fe alloy (denoted as re-PSCFN) in a reducing atmosphere. Electrochemical impedance spectroscopy (EIS) combined with distribution of relaxation times (DRT) analysis reveals that the rate-limiting step for the HOR at the anode is the hydrogen adsorption-dissociation process. While the charge transfer process is found to dominate the ORR at the cathode. As the doping of Ni is increased, the cathode polarization resistance for ORR decreases from 0.19 Ω·cm2 for PSCFN0.1 to 0.09 Ω·cm2 for PSCFN0.2 at 800 °C in air. A similar trend is observed for the anode polarization resistance for HOR, which exhibits a reduction from 2.46 Ω·cm2 of re-PSCFN0.1 to 1.28 Ω·cm2 of re-PSCFN0.2 at 800 °C in H2. When fueled with hydrogen, the single cell based on the PSCFN0.2/La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM)(240μm)/re-PSCFN0.2 configuration delivers a maximum power density of 623 mW·cm-2 and slight performance degradation when operated for 220 h at 800 °C. Ni doping results in the charge redistribution of B-site ions. Increasing the doping level of Ni results in additional electron transfer channels and oxygen vacancies that adsorb more oxygen species, which facilitates the ORR performance. Furthermore, an increase in the number of Ni-Fe nanoparticles and creation of abundant interfaces in the anode promotes HOR. This work suggests that PSCFN0.2 has the potential to be an excellent electrode material for a symmetric SOFC.

Further Optimization of the Properties of Pr0.6Sr0.4Fe0.9W0.1O3-δ by Cu-doping As Symmetric Electrodes for Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

A highly stable of tungsten doped Pr0.6Sr0.4Fe0.9W0.1O3-δ electrode for symmetric solid oxide fuel cells

Characterization of Pr0.5A0.5Fe0.9W0.1O3-δ (A = Ca, Sr and Ba) as Symmetric Electrodes for Solid Oxide Fuel Cells

Cobalt-free Sr0.7Y0.3CuO2+δ As a Cathode for Intermediate-Temperature Solid Oxide Fuel Cell

A Cobalt-Free Electrode Material La0.5Sr0.5Fe0.8Cu0.2O3 − Δ for Symmetrical Solid Oxide Fuel Cells

Electrochemical activity of copper doped Sr2.7Pr0.3Fe2O7− cathode catalysts for solid oxide fuel cells

Role Of Cu And Sr In Improving The Electrochemical Performance Of Cobalt-Free Pr1-Xsrxfe1-Ycuyo3-Delta Cathode For Intermediate Temperature Solid Oxide Fuel Cells

Bifunctional electrocatalysts Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (x=0.1,0.2) for HOR and ORR of a symmetric solid oxide fuel cell

In situ exsolved Co–Fe nanoparticles on the Ruddlesden-Popper-type symmetric electrodes for intermediate temperature solid oxide fuel cells

Cobalt-free Ba0.5Sr0.5Fe0.8Cu0.1Ti0.1O3−δ As a Bi-Functional Electrode Material for Solid Oxide Fuel Cells

Electrochemical Performance of Pr 0.4 Sr 0.5 Co x Fe 0.9– x Mo 0.1 O 3−δ Oxides in a Reversible SOFC/SOEC System

High performance and stability of PrBa0.5Sr0.5Fe2O5+δ symmetrical electrode for intermediate temperature solid oxide fuel cells

Gadolinium-doped SrFeO 3 As a Highly Active and Stable Electrode for Symmetrical Solid Oxide Fuel Cells

Impregnated LaCo0.3Fe0.67Pd0.03O3-δ As a Promising Electrocatalyst for “symmetrical” Intermediate-Temperature Solid Oxide Fuel Cells

A highly active cathode material of Cu-doped Sr2Fe1.5Mo0.5O6 for symmetrical solid oxide fuel cells

Enhanced oxygen reduction reaction activity and electrochemical performance of A-site deficient (La0.6Sr0.4)1-xFe0.8Ni0.2O3−δ cathode for solid oxide fuel cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Preparation and Characterization of New Cobalt-Free Cathode Pr0.5Sr0.5Fe0.8Cu0.2O3−δ for IT-SOFC

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

Tuning Pr0.5Ba0·5FeO3-δ cathode to enhanced stability and activity via Ca-doping for symmetrical solid oxide fuel cells