Abstract:Advanced symmetric solid oxide fuel cells (SOFCs) with a reducible electrode were proposed. Specifically, La2NiO4 + La0.9Sr0.1Ga0.8Mg0.2O3-delta (LSGM) [or Sm0.2Ce0.8O1.9 (SDC)] composite electrodes were successfully fabricated by an infiltration method and tested for power generation. X-ray diffraction (XRD) results demonstrated there was no noticeable phase reaction between infiltrated La2NiO4 and LSGM (or SDC) scaffold, and scanning electron microscopy (SEM) analysis indicated that the La2NiO4 phase formed as nanoparticles that decorated the surface of the scaffold. Different from conventional symmetric SOFCs, the electrode material La2NiO4 of current cells was reduced under an anode atmosphere to form metallic nickel as a high active catalyst for fuel oxidation. After the reduction, the electrode morphology and geometric integrity were maintained for the infiltrated electrode. For thick electrolyte-supported symmetric SOFCs with infiltrated La2NiO4 electrodes, an attractive maximum power density of similar to 550 mW cm(-2) was achieved at 800 degrees C operating on hydrogen fuel, significantly higher than similar cells with stable perovskite oxide electrodes, as reported in the literature. It suggested that the unreduced and reduced La2NiO4 performed well as a cathode for the oxygen reduction reaction and as an anode for fuel electro-oxidation, respectively. In addition, a favorable operating stability was demonstrated for a symmetric SOFC with an infiltrated La2NiO4 electrode. It provides a new way for developing cost-effective SOFCs with huge application opportunities.

Impregnated LaCo 0.3 Fe 0.67 Pd 0.03 O 3-δ as a promising electrocatalyst for “symmetrical” intermediate-temperature solid oxide fuel cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Palladium and ceria infiltrated La0.8Sr0.2Co0.5Fe0.5O3-δ cathodes of solid oxide fuel cells

Nano La0.6ca0.4fe0.8ni0.2o3-Delta Decorated Porous Doped Ceria As A Novel Cobalt-Free Electrode For "Symmetrical" Solid Oxide Fuel Cells

A Highly Active Hybrid Catalyst Modified (La0.60sr0.40)0.95co0.20fe0.80o3-Δ Cathode for Proton Conducting Solid Oxide Fuel Cells

In situ exsolved Co–Fe nanoparticles on the Ruddlesden-Popper-type symmetric electrodes for intermediate temperature solid oxide fuel cells

Sc-substituted La0.6Sr0.4FeO3−δ Mixed Conducting Oxides As Promising Electrodes for Symmetrical Solid Oxide Fuel Cells

Efficient Electro‐Catalysts for Enhancing Surface Activity and Stability of SOFC Cathodes

Advanced Symmetric Solid Oxide Fuel Cell With An Infiltrated K2nif4-Type La2nio4 Electrode

In Situ Growth of Nanoparticles in Layered Perovskite La0.8Sr1.2Fe0.9Co0.1O4−δ As an Active and Stable Electrode for Symmetrical Solid Oxide Fuel Cells

Niobium doped lanthanum calcium ferrite perovskite as a novel electrode material for symmetrical solid oxide fuel cells

Ni Doped La0.6Sr0.4FeO3-δ Symmetrical Electrode for Solid Oxide Fuel Cells

Efficient and stable symmetrical solid oxide fuel cell via A-site non-stoichiometry

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Performance of La 0.5 Sr 0.5 Fe 0.9 Mo 0.1 O 3 − δ –Sm 0.2 Ce 0.8 O 2 − δ composite cathode for CeO 2 - and LaGaO 3 -based solid oxide fuel cells

A Cobalt-Free Electrode Material La0.5Sr0.5Fe0.8Cu0.2O3 − Δ for Symmetrical Solid Oxide Fuel Cells

A La0.6Sr0.4CoO3−δ-based Electrode with High Durability for Intermediate Temperature Solid Oxide Fuel Cells

High Active Cathode for Doped Ceria Electrolyte in SOFC

Cathode supported tubular solid oxide fuel cells with nanostructured La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 electrocatalysts

Rational design of favourite lithium-ion cathode materials as electrodes for symmetrical solid oxide fuel cells

Tuning Layer-Structured La0.6sr1.4mno4+Delta Into A Promising Electrode For Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells Through Surface Modification