Abstract:In the article, pure gadolinium doped ceria (GDC) is considered as a fuel electrode in high temperature CO2 electrolysis utilizing electrolyte‐supported single cells. The electrochemical performance and long–term stability are investigated and compared with state‐of‐the‐art materials. By impedance and distribution of relaxation time analysis the processes during several operation conditions are evaluated. In this work, the performance, electrochemical processes, and stability of GDC (Ce0.8Gd0.2O1.9) fuel electrode containing single cells (GDC/8YSZ/GDC/LSCF) were examined in CO2 electrolysis conditions. The current density and area specific resistance is determined for different operation conditions. The examined cells showed a higher performance compared to state‐of‐the‐art Ni−YSZ fuel electrode (Ni‐YSZ/8YSZ/GDC/LSCF) based single cells with a similar production route. Furthermore, the cells were examined by means of electrochemical impedance spectroscopy (EIS) and the recorded data were evaluated by the distribution of relaxation times (DRT) analysis. An equivalent circuit model (ECM) consisting of four time constants and a Gerischer impedance (LR−RQ1−RQ2−G−RQ4−RQ5) was established to gain further insight into the individual processes in the cells. For instance, the low–frequency process P5 referring to RQ5 is the rate‐determining step in CO2 electrolysis and is assigned to a surface reaction including the charge transfer and possibly the gas diffusion in the GDC fuel electrode. A long–term stability test was performed in CO2 electrolysis conditions at 900 °C with a constant current load of −0.5 A ⋅ cm−2 for up to 1200 h. A degradation rate of 62 mV ⋅ kh−1 was observed. By EIS analysis, a similar contribution of the ohmic and polarization resistances to the degradation was determined. The low–frequency process P5 and thus the surface reaction including the charge transfer in the GDC fuel electrode is contributing most to the increase in polarization resistance. After the long–term stability test, scanning electron microscopy (SEM) analysis was carried out and a coarsening of GDC particles in the fuel electrode was observed.

Gadolinia Doped Ceria And Composites For Fuel Cell Applications

Gadolinium Doped Ceria as Nickel–Free Fuel Electrode in High Temperature CO2‐Electrolysis

Synthesis and Characterization of Gadolinium-Doped Zirconia as a Potential Electrolyte for Solid Oxide Fuel Cells

In situ self-assembled NdBa0.5Sr0.5Co2O5+δ/Gd0.1Ce0.9O2-δ hetero-interfaces enable enhanced electrochemical activity and CO2 durability for solid oxide fuel cells

Gd-doped ceria with extraordinary oxygen-ion conductivity for low temperature solid oxide fuel cells

Synthesis and Characterisation of Nanocrystalline CoxFe1-xGDC Powders as a Functional Anode Material for the Solid Oxide Fuel Cell

Performance of a double-layer CGO/YSZ electrolyte for solid oxide fuel cells

Novel Doped Barium Cerate–carbonate Composite Electrolyte Material for Low Temperature Solid Oxide Fuel Cells

Ceramic Fuel Cells Based on Ceria–carbonate Salt Composite Electrolyte

The Key Materials Used for Reduced Temperature Ceramic Fuel Cells

Preparation and Properties of Gd3+ and Y3+ Co-Doped Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells

A Novel Gd3+ and Yb3+ Co-Doped Ceria-Sulphate Composite Electrolyte for Intermediate-Temperature Fuel Cells

Co-synthesis of LSCFN-GDC Electrode for Symmetric Solid Oxide Fuel Cell Running on Propane

Solid oxide fuel cell with a spin-coated yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolyte

High Performance Gd3+ and Y3+ Co-Doped Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells

BaCO3 Nanoparticles-Modified Composite Cathode with Improved Electrochemical Oxygen Reduction Kinetics for High-Performing Ceramic Fuel Cells

Analyzing the composite heterostructure as an efficient electrolyte for low-temperature ceramic fuel cells

Enhancement of Conductivity in Phase Pure and Doped Ceria for Fuel Cell Applications

Intermediate Temperature Fuel Cell Performance of the Composite Electrolyte Ce0.8Gd0.2O2-α-(Li/K)2CO3

Nanostructured Lscf-GDC Cathodes Via a Sol–Gel Method for High Performance Solid Oxide Fuel Cells

Interface channels accelerating ion transport through alkaline earth metal carbonate - Gd0.1Ce0.9O1.95 heterostructure