Abstract:Solid oxide fuel cells (SOFCs) can be used for the high-efficiency conversion of chemical energy into electricity. The exploration of new oxide anodes as alternatives to conventional Ni(O), aims to enhance coking resistance and the oxidation–reduction (redox) stability of the anode. An n-type semiconductor with electron charge carriers will be conducive to the electric conductivity, σ , under fuel conditions, but the research on n-type oxide electrodes is limited mostly to perovskite-type titanate that requires very high temperature and low oxygen partial pressure to provide a decent σ . Transparent conductive oxides (TCOs) with a superior σ even at room temperature are widely explored for electronic devices, but they have never been studied as an alternative oxide anode of an SOFC at a reduced temperature. An n-type TCO type material ZnGa 2 O 4 (ZGO) that could be reduced at a temperature below 700 °C was used as the anode for the oxidation of H 2 and hydrocarbon (ethanol and propane) at ≤650 °C. ZGO provided a high σ of 1.5 and 0.33 S cm −1 at 700 °C and 600 °C, respectively, and the cell with a ZGO anode and Sc 0.18 Ce 0.01 Zr 0.81 O 2− δ electrolyte showed a high redox stability. The performance of the cell with a ZGO/GDC (Gd 2 O 3 doped ceria) anode could be enhanced by the infiltration of 1% Ni, imparting a peak power of 574 mW cm −2 at 650 °C and a stable cell performance of 300 mW cm −2 at 600 °C for 300 hours. The cell was also found to be relatively stable under carbonaceous fuel, suppressing carbon deposition at 600 °C. This work provided a new avenue of designing an n-type oxide anode that could be reduced in situ under the fuel condition of a low-temperature SOFC.

The Key Materials Used for Reduced Temperature Ceramic Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Designing Proton Conducting Electrolytes for Low-Temperature Ceramic Fuel Cells

Validating the efficiency of γ-Al2O3/La0.6Sr0.4Co0.2Fe0.8O3-δ double-layer electrolyte for low temperature solid oxide fuel cell

A high-performance ceramic fuel cell with samarium doped ceria–carbonate composite electrolyte at low temperatures

Improved Ionic Transport Using a Novel Semiconductor Co0.6Mn0.4Fe0.4Al1.6O4 and Its Heterostructure with Zinc Oxide for Electrolyte Membrane in LT-CFCs

Non-doped CeO2-carbonate nanocomposite electrolyte for low temperature solid oxide fuel cells

Ceramic Materials for Solid Oxide Fuel Cell

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

3D printed Sm-doped ceria composite electrolyte membrane for low temperature solid oxide fuel cells

Gadolinia Doped Ceria And Composites For Fuel Cell Applications

High-Performance Low-Temperature Solid Oxide Fuel Cell with a Pt@C–Ni 0.8 Co 0.15 Al 0.05 LiO 2−δ Composite Cathode

Novel Doped Barium Cerate–carbonate Composite Electrolyte Material for Low Temperature Solid Oxide Fuel Cells

Ceramic Fuel Cells Based on Ceria–carbonate Salt Composite Electrolyte

New Reduced-Temperature Ceramic Fuel Cells with Dual-Ion Conducting Electrolyte and Triple-Conducting Double Perovskite Cathode

Transparent conductive oxide type materials as the anode of solid oxide fuel cells at a reduced temperature

Toward Reducing the Operation Temperature of Solid Oxide Fuel Cells: Our Past 15 Years of Efforts in Cathode Development

Application of sodium battery electrode in low temperature ceramic fuel cells

Processing of high-performance Co doped Y2O3 as a single-phase electrolyte for low temperature solid oxide fuel cell (LT-SOFC)

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Doped Zirconia/Ceria Electrolyte Fabricated at Low Temperature