Abstract:Integrated heat and roll forming (IHMRF) is a process that uses thermal and mechanical loads to produce localized plastic strains in plates to form complex curvature hull plates. The magnitude of the resulting plastic strain depends mainly on the following forming parameters: the machining parameters (power of the heat source, speed of the heat source, and the forming depth of the rollers), the thickness of the plate, and the thermo-physical and mechanical properties of the plate. Finding the correspondence between the plastic strain and forming parameters is the key to selecting the appropriate machining parameters for forming. A data-driven approach is ideal for this purpose. However, due to the characteristics of the IHMRF process, the forming process involves a large number of variables, and different materials have different temperature-dependent yield strengths. These high-dimensional input characteristics create a conflict between the required number of samples and the model training requirements. This paper presents a physically informed data-driven (PIDD) approach for modeling the relationship between forming parameters and plastic strains in IHMRF. Based on dimensional analysis and domain knowledge, the proposed method derives the basic thermal and mechanical relationships between the forming parameters, obtaining a much smaller number of physical parameters. These physical parameters are expressions of the physical knowledge of forming in low-dimensional space. Using the physical parameters yields higher accuracy on fewer sample data points than directly using the forming parameters as input features. Furthermore, the models trained on a variety of commonly used materials and plate thicknesses achieved comparable accuracy to the numerical simulation with unseen materials and plate thicknesses. Experimental and numerical simulations further verify the effectiveness of the proposed method by machining plates of various materials to the same shape.

Effect of Process Parameters on Stress and Strain of Hybrid Deposition and Micro-Rolling

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Simulation of Microstructure Evolution During Hybrid Deposition and Micro-Rolling Process

Effects of Process Parameters on Microstructural Evolution During Hot Ring Rolling of AISI 5140 Steel

Research on Micro Riblets Rolling Process Based on Uncertainty Analysis

Energy Consumption and Mechanical Proprietaries of Hybrid Deposition & Micro-Rolling

Overlapping optimization of hybrid deposited and micro-rolling additive manufacturing

Plasticity Improvement of Ball-Spun Magnesium Alloy Tube Based on Stress Triaxiality

Analysis and Homogenization of Residual Stress in Aerospace Ring Rolling Process of 2219 Aluminum Alloy Using Thermal Stress Relief Method

The central strain analytical modeling and analysis for the plate rolling process

Multi-objective optimization of parametric design for profile ring rolling process based on residual stress control

Optimizing the Rolling Process of Lightweight Materials

Investigation of Residual Stress Distribution Induced During Deep Rolling of Ti-6Al-4V Alloy

Investigation of Mechanical Properties for Hybrid Deposition and Micro-Rolling of Bainite Steel

Analytical modeling of through depth strain induced by deep rolling

Influence of in situ micro-rolling on the improved strength and ductility of hybrid additively manufactured metals

Static softening behavior of 316L stainless steel under flexible rolling process

Effect of Grain Size and Processing Parameters on Critical Strain for Austenite Dynamic Recrystallization

The effect of the increased strain per pass during the hot-rolling and its effect on the tensile properties of V-Mo and Cr-V-Mo microalloyed dual-phase steels

A Physic-Informed Data-Driven Relational Model of Plastic Strain vs. Process Parameters during Integrated Heating and Mechanical Rolling Forming of Hull Plates

Thermo-mechanical Coupled Analysis of Hot Ring Rolling Process