Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

Acoustical Contribution Calculation and Analysis of Compressor Shell Based on Acoustic Transfer Vector Method

Numerical Analysis of Noise Radiation from Refrigerator Compressor Shell

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

Numerical analysis of the influence of lubrication oil on noise radiation of compressor shell

The Inner Acoustic Field Variety Due to the Effect of Refrigerator Compressor Oil Based on Finite Element Analysis

Noise Analysis and Control of Reciprocating Refrigerators Compressor

Numerical Simulation and Structure Optimization of Compressor Muffler

An Investigation of the Acoustic Enclosure of an Air Conditioning Compressor Using Response Surface Analysis and Topological Rigidity Optimization

Performance Research and Optimization of Sound Insulation Hood of Air Compressor Unit

VIBRATION-ACOUSTICS STUDY OF R410A ROTARY COMPRESSORS

Near Field Acoustical Holography Research & Application on Compressor & Refrigerator.

Study on Vibration Modes and Acoustic Radiation Modes for Air Conditioning Compressor

Study of Unsteady Fluctuating Lift and its Acoustic Radiation on Diffuser Vanes of Centrifugal Compressor

Nearfield Acoustical Holography Research & Application on Compressor & Refrigerator

Reduction of Radiated Noise from Rotary Compressors by Acoustic Interference Effects

Acoustic power measurement of linear compressors

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Study on the Simulation Method of Compressor Aerodynamic Noise Based on CFD and IBEM

Investigation of Acoustic and Aerodynamic Noise in Air Conditioner Outdoor Unit

Analysis of Aerodynamic Noise on Small Centrifugal Compressor

Study of noise and structural characteristics of twin-screw air compressor based on multi-physical field coupling