Abstract:The recycling of spent lithium-ion batteries has become an urgent imperative. In recent years, the rising demand for lithium has sparked interest in the selective extraction of lithium from spent LIBs cathode materials. This process is of interest as it can streamline processes, improve lithium recovery efficiency, and reduce processing costs. Electrochemical methods for selectively extracting lithium from spent cathode materials have gained significant attention among various selective extraction methods due to their advantages, such as low energy consumption and environmental friendliness. Despite substantial progress in improving the efficiency of lithium recovery through electrochemical methods, the economic returns from lithium salt products, to some extent, are still insufficient to offset the processing costs of the entire process, thereby limiting the further development of this technology. Therefore, it is necessary to develop reasonable strategies for the utilization of such de-lithiated materials to further enhance product yields. One promising strategy among these approaches is direct regeneration of fresh cathode materials from the de-lithiated material. However, due to a lack of clear understanding of the structural evolution of transition metal oxides during the lithium extraction process, and the lithiation mechanisms of lithium-depleted materials, there is currently no research report on the direct regeneration of such de-lithiated materials into battery materials. Herein, an electrochemical method using LiCl aqueous as electrolyte is developed to realize the selective extraction of lithium from spent polycrystal LiNi 0.55 Co 0.15 Mn 0.3 O 2 (NCM) cathode materials, with a maximum de-lithiation rate approaching 90%. Thorough characterizations were conducted to monitor the morphological, structural, and compositional evolution of NCM during the electrochemical de-lithiation process. These findings contribute to a profound understanding of the characteristics of the de-lithiated material and inform the rational design of regeneration pathways tailored to such materials. The results reveal that the deep de-lithiation of NCM in lithium-aqueous electrolyte triggers water-molecule intercalation, leading to an unusual phase transformation beyond H1→H2→H3. This phase transformation causes substantial lattice expansion along c-axis and introduces severe lattice distortion in de-lithiated material. The over-expanded lattice and the presence of bulk defects resulted in an unstable structure, posing huge challenge for the subsequent direct regeneration of de-lithiated material using conventional calcination methods. To address this, we employ a hydrothermal re-lithiation process, characterized by a milder, lithium-rich and water-based environment. This process is able to create a "lithium-water-balance" structure for de-lithiated materials by promoting the lithium diffusion into the lithium-deficiency structure and facilitating the exchange between lithium ions and water molecules. This process effectively enhances structural stability of the de-lithiated material. As a result, subsequent calcination successfully converts the degraded structure back into the original lithium-conductive layer structure by further eliminating the remaining lattice defects in material and promoting the cation rearrangement. The regenerated material exhibits decent electrochemical performances, which delivers a capacity of 153.2 mAh g −1 at 1C and 132.5 mAh g − 1 at 5C. This work provides insights into the electrochemical de-lithiation method and fills a gap in the utilization of de-lithiated NCM, paving the way for the sustainable recycling of spent LIBs.

One-step selective recovery and cyclic utilization of valuable metals from spent lithium-ion batteries via low-temperature chlorination pyrolysis

Urea Solvothermal Regeneration of Spent LiNi0.5Co0.2Mn0.3O2: Performance and Environmental Benefits

Stepwise recovery of critical metals from spent NCM lithium-ion battery via calcium hydroxide assisted pyrolysis and leaching

A clean and efficient process for simultaneous extraction of Li, Co, Ni and Mn from spent Lithium-ion batteries by low-temperature NH4Cl roasting and water leaching

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

Achieving low-temperature hydrothermal relithiation by redox mediation for direct recycling of spent lithium-ion battery cathodes

A mild and efficient closed-loop recycling strategy for spent lithium-ion battery

New strategy of electrochemical precipitation to metals separation in spent NCM cathode materials for direct regeneration

Feasible route for the regeneration of cathode materials from spent lithium-ion batteries via reduction leaching and in-site precipitation

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation

Strengthening Valuable Metal Recovery from Spent Lithium-Ion Batteries by Environmentally Friendly Reductive Thermal Treatment and Electrochemical Leaching

Clean Universal Solid-State Recovery Method of Waste Lithium-Ion Battery Ternary Positive Materials and Their Electrochemical Properties

One-step selective separation and efficient recovery of valuable metals from mixed spent lithium batteries in the phosphoric acid system

Closed-loop recycling of spent lithium-ion batteries based on selective sulfidation: An unconventional approach

Direct Recycling of Spent LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathodes Based on Single Oxalic Acid Leaching and Regeneration under Mild Conditions Assisted by Lithium Acetate

Leaching of valuable metals from cathode active materials in spent lithium-ion batteries by levulinic acid and biological approaches

Cleaner recycling of cathode material by in-situ thermite reduction

Recovery of valuable metals from spent lithium-ion batteries via zinc powder reduction roasting and cysteine leaching

Enhanced Leaching of Metals from Spent Lithium-Ion Batteries by Catalytic Carbothermic Reduction

Sustainable Electrochemical Recycling of Spent Lithium-Ion Batteries: Selective Extraction of Lithium and Direct Regeneration of De-Lithiated Material

Selective Regeneration of Lithium from Spent Lithium-Ion Batteries Using Ionic Substitution Stimulated by Mechanochemistry