Abstract:Carbon-based perovskite solar cells without a hole transport layer (HTL) are considered to be highly stable and of low cost. However, the deficient interface contact and inferior hole extraction capability restrict the further improvement of the device efficiency. Introducing a hole transporting layer, such as cuprous thiocyanate (CuSCN), can enhance the hole extraction ability and improve the interface contact. However, our further studies indicated that—at a certain temperature—for carbon-based solar cells, in the CuSCN layer, the diffusion of SCN– into the perovskite film would produce more interfacial defects and aggravate nonradiative recombination, thus hindering the carrier transport. We further disclosed the reasons for performance attenuation during the thermal treatment of carbon electrodes, proposed a vacuum-assisted drying process for carbon electrodes to suppress the destructive effect, and finally, achieved an enhanced efficiency for perovskite solar cells with a CuSCN inorganic HTL and screen-printable carbon electrode. Also, the unencapsulated perovskite solar cell demonstrated over 80% efficiency retention after being stored in an ambient atmosphere (45–70% relative humidity (RH)) for over 1000 h and maintained over 85% efficiency retention for 309 h of 1-sun irradiation under a continuous nitrogen flow under open-circuit conditions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05495?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05495</a>.Material characterization (UV–vis, SEM, XRD, EIS); resistance of the carbon electrodes; parameters from the fitting of the TRPL results; and photovoltaic properties of the devices (J–V curves and J–V metrics) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05495/suppl_file/am1c05495_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improving the Interfacial Contact of Screen-Printed Carbon Electrodes for Perovskite Solar Cells

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Carbon Quantum Dot-Passivated Perovskite/Carbon Electrodes for Stable Solar Cells

Vacuum-Assisted Drying Process for Screen-Printable Carbon Electrodes of Perovskite Solar Cells with Enhanced Performance Based on Cuprous Thiocyanate as a Hole Transporting Layer

Improved Interfacial Contact between "Perovskite/Electron‐Transport‐Layer" by Hydrophilic Molecule to Achieve Efficiency > 14%, Carbon‐electrode Basing, Hole‐Conductor‐Free, Low‐temperature Mesoscopic Perovskite Solar Cells

Improving Interfacial Charge Transfer by Multi-Functional Additive for High-Performance Carbon-Based Perovskite Solar Cells

Improving Photovoltaic Performance of Carbon-Based CsPbBr3 Perovskite Solar Cells by Interfacial Engineering Using P3HT Interlayer

Carbon-Based Electrode Engineering Boosts the Efficiency of All Low-Temperature-Processed Perovskite Solar Cells

Interfacial Post-Treatment for Enhancing the Performance of Printable Carbon-Based Perovskite Solar Cells

Organic Bromide Salts Interface Modification for High-Efficiency Perovskite Solar Cells with Printed Carbon Electrode

Dendritic Growth Lowers Carbon Electrode Work Function for Efficient Perovskite Solar Cells

Efficiency Enhancement of Perovskite Solar Cells by Forming a Tighter Interface Contact of C/CH3NH3PbI3

Application of Carbon Materials in Conductive Electrodes for Perovskite Solar Cells

Low Temperature Processed Fully Printed Efficient Planar Structure Carbon Electrode Perovskite Solar Cells and Modules

Efficiently Improving the Stability of Inverted Perovskite Solar Cells by Employing Polyethylenimine-Modified Carbon Nanotubes As Electrodes.

Interface Modification Via a Hydrophobic Polymer Interlayer for Highly Efficient and Stable Carbon-Based Inorganic Perovskite Solar Cells

Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface

Efficient and Stable CuSCN-based Perovskite Solar Cells Achieved by Interfacial Engineering with Amidinothiourea

Contact Engineering and In‐Situ Formation of 2D Perovskite via Solid‐Phase Growth for Efficient Hole‐Transport‐Layer‐Free Perovskite Solar Cells

All Electrospray Printing of Carbon‐Based Cost‐Effective Perovskite Solar Cells

Interfacial Investigation on Printable Carbon-Based Mesoscopic Perovskite Solar Cells with NiOx/C Back Electrode