Abstract:All-inorganic CsPbBr3 perovskite solar cells (PSCs) have attracted more attentions due to the excellent environmental stability, however, the wide bandgap and relatively poor crystallinity of CsPbBr3 have been the main obstacle to improve their power conversion efficiency (PCE). Herein, we proposed an efficient and simple strategy of precursor additive in the two-step aqueous-solution method, the resulted CsPbBr3 film has achieved more uniform grain size, almost pure perovskite phase, smoother surface, less defects, enhanced light absorption and longer carrier lifetime. This is due to the rapid evaporation of additive (IPA and CH3OH) in the CsBr/H2O precursor leads to a relatively higher local CsBr concentration on the surface of PbBr2, which can provide more nucleation sites and accelerate the crystallization of perovskite. Further, when utilizing the optimal additive of 5% (in volume) IPA, the HTM-free carbon-based CsPbBr3 PSCs obtained a PCE improvement from 9.09% to 10.29%, and an ultrahigh fill factor (FF) of 85.21%. What is more, by adding 0.1 mol/L PbCl2 into the PbBr2 solution in the first step, the open circuit voltage of device has increased from 1.36 V to 1.48 V, the champion PCE reached 10.37% (steady output PCE of 10.17%), and the non-encapsulated device could maintain 85% of its initial efficiency after 50 d in the air. This work provides a cost-effective approach to grow CsPbBr3 film and boosts the efficiency benchmark of the CsPbBr3 PSCs to more than 10%, it is desirable that the highly efficient and stable CsPbBr3 PSCs can be developed in future.

Organic Bromide Salts Interface Modification for High-Efficiency Perovskite Solar Cells with Printed Carbon Electrode

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Modification of Energy Levels by Cetyltrimethylammonium Bromide at the Perovskite/Carbon Interface for Highly Efficient and Stable Perovskite Solar Cells

High-performance carbon-based CsPbI2Br perovskite solar cells via small molecule modification

Ultrahigh Fill-Factor All-Inorganic CsPbBr3 Perovskite Solar Cells Processed from Two-Step Solution Method and Solvent Additive Strategy

Multifunctional Brominated Graphene Oxide Boosted Charge Extraction for High-Efficiency and Stable All-Inorganic CsPbBr3 Perovskite Solar Cells

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Improving Photovoltaic Performance of Carbon-Based CsPbBr3 Perovskite Solar Cells by Interfacial Engineering Using P3HT Interlayer

Multifunctional Interface Modification Enables Efficient and Stable HTL-Free Carbon-Electroded CsPbI2Br Perovskite Solar Cells

Mixed-Bromide Halide Exchange toward Efficient and Stable Carbon-Electrode CsPbBr 3 Solar Cells

High-performance Carbon Electrode-Based CsPbI2Br Inorganic Perovskite Solar Cell Based on Poly(3-Hexylthiophene)-carbon Nanotubes Composite Hole-Transporting Layer.

Synergistic Interface Layer Optimization and Surface Passivation with Fluorocarbon Molecules toward Efficient and Stable Inverted Planar Perovskite Solar Cells

Synchronous Interface Modification and Bulk Passivation Via a One-Step Cesium Bromide Diffusion Process for Highly Efficient Perovskite Solar Cells

Interface Engineering of Low Temperature Processed All-Inorganic CsPbI2Br Perovskite Solar Cells Toward PCE Exceeding 14%

Sublimation and Recrystallization of CsPbBr3 Constructing a Perovskite-Carbon Interface to Facilitate Hole Transfer in Printable All-Inorganic Perovskite Solar Cells.

Perovskite/P3HT Graded Heterojunction by an Additive-Assisted Method for High-Efficiency Perovskite Solar Cells with Carbon Electrodes

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Halogen Bond Involved Post‐Treatment for Improved Performance of Printable Hole‐Conductor‐Free Mesoscopic Perovskite Solar Cells

High-performance, Stable and Low-Cost Mesoscopic Perovskite (ch3nh3pbi3) Solar Cells Based on Poly(3-Hexylthiophene)-modified Carbon Nanotube Cathodes

Multistrategy Toward Highly Efficient and Stable CsPbI2Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Surface-Bulk-Passivated Perovskite Films Via 2-Thiophenemethylammonium Bromide and Pbbr2 for Air-Processed Perovskite Solar Cells with High-Stability