Abstract:Perovskite solar cells (PSCs)have attracted much attention during the past years due to their excellent photovoltaic properties and low-cost solution processing.The power conversion efficiency (PCE)has been rapidly increased to 22.7% since the first report of 3.8% in 2009,which approaches the levels of commercial polycrystalline silicon solar cells,CdTe solar cells and CIGS solar cells. Spin-coating is commonly used to fabricate PSCs in the labs,but it can't meet the requirements for large-scale and low-cost process.It is simple to operate the spin-coating process with good repeatability.However,spin-coating still possesses some short-comings,including serious waste of materials,only producing film without patterns,incapable of continuous fabrication.Therefore, it cannot match with the production of industrialization with large area and high throughout.It is still a big challenge to transfer the fabrication from lab-scale to large-scale industrialization with low cost and high throughout. Printing techniques show many advantages,e.g.high material utilization,low cost,large area,high throughout and matching with flexible substrate,and they have been used to fabricate PSCs.The PCE approaching 20% was achieved in printed,small-area PSCs,and numerous efforts have been made to improve printed large-area PSCs with PCE between 10% and 16%.Furthermore,it has already achieved printed,flexible PSCs with PCE of about 10%.There are still many issues to be solved for accelerating the industrialization.Ⅰ.Solvent engineering and gas-assisted treatment,commonly used in spin-coating process for producing high-quali-ty perovskite films,are not matchable with printing process,resulting in the poor morphology and the low reproducibility in printed perovskite film.Ⅱ.The high-temperature annealing process would restrict the use of flexible substrate and the choice of interfacial materials.Ⅲ.Perovskite materials are sensitive to humidity,and it is necessary to improve their environment adaptability and reduce the cost.Hence,it is very important to optimize printing techniques for fabricating large-area PSCs with high efficiency,high throughout and low cost. In this review,we summarize the research progress on PSCs fabricated via printing techniques,including inkjet-printing,spray-coating,slot-die coating,doctor-blading.Furthermore,we also discuss the challenges and prospects of potential commercial PSCs.

All Electrospray Printing of Carbon‐Based Cost‐Effective Perovskite Solar Cells

Low Temperature Processed Fully Printed Efficient Planar Structure Carbon Electrode Perovskite Solar Cells and Modules

A Scalable Electrodeposition Route to the Low-Cost, Versatile and Controllable Fabrication of Perovskite Solar Cells

Toward Industrial-Scale Production of Perovskite Solar Cells: Screen Printing, Slot-Die Coating, and Emerging Techniques

A high-pressure isostatic lamination technique to fabricate versatile carbon electrode-based perovskite solar cells

Carbon-Based Electrode Engineering Boosts the Efficiency of All Low-Temperature-Processed Perovskite Solar Cells

Perovskite Ink with an Ultrawide Processing Window for Efficient and Scalable Perovskite Solar Cells in Ambient Air.

Application of Carbon Materials in Conductive Electrodes for Perovskite Solar Cells

Perovskite solar cells based on screen-printed thin films

Fully Printed High‐Performance Quasi‐Two‐Dimensional Perovskite Solar Cells via Multifunctional Interfacial Engineering

Boosting the Efficiency and the Stability of Low Cost Perovskite Solar Cells by Using CuPc Nanorods As Hole Transport Material and Carbon As Counter Electrode

Screen‐Printing Technology for Scale Manufacturing of Perovskite Solar Cells

High‐Performance ITO‐Free Perovskite Solar Cells Enabled by Single‐Walled Carbon Nanotube Films

Several Economical and Eco-Friendly Bio-Carbon Electrodes for Highly Efficient Perovskite Solar Cells

Fully Screen‐Printed Perovskite Solar Cells with 17% Efficiency via Tailoring Confined Perovskite Crystallization within Mesoporous Layer

An Overview of Current Printing Technologies for Large-Scale Perovskite Solar Cell Development

15% efficient carbon based planar-heterojunction perovskite solar cells using a TiO2/SnO2 bilayer as the electron transport layer

A Review on the Fabrication of Perovskite Solar Cells via Printing Techniques

Fully printed flexible perovskite solar modules with improved energy alignment by tin oxide surface modification

Efficient, stable, and fully printed carbon-electrode perovskite solar cells enabled by hole-transporting bilayers

Recent Developments in Upscalable Printing Techniques for Perovskite Solar Cells