Abstract:The two-phase loop thermosyphon (TPLT) with a high filling ratio is considered an efficient heat transfer device and therefore has a good application prospect in the field of high heat flux dissipation engineering. However, the heat transfer mechanism of the TPLT with high filling ratios remains elusive. In this study, we establish a computational fluid dynamics (CFD) model of the loop thermosyphon. In order to accurately simulate boiling and condensation processes, we take into account the relationship between saturation temperature and pressure in the phase change model. There were two flow patterns, i.e., the bubbly flow and the slug flow, under low filling ratios in the heating section, in which the pool boiling dominates the main heat transfer mechanism, and dropwise condensation occurred in the condensation section. The driving force to propel the liquid during the vapor bubbles rise cannot be transferred to the liquid in the right tube, resulting in lower flow velocity. In stark contrast, the single-phase flow and the bubbly flow occurred periodically in the loop thermosyphon with high filling ratios, in which the dominant heat transfer mechanism is the flow boiling. The rising bubbles promote the clockwise flow of liquid in the loop like a pump. Because of the switch of the heat transfer mechanism, the average flow velocity increased, and the thermal resistance decreased. The minimum thermal resistance was 0.15 K/W under a filling ratio of 75%, and the maximum average velocity of the fluid was 0.19 m/s. Furthermore, we found a strong coupling relationship between the heat transfer performance and the flow characteristics of the loop thermosyphon. For low filling ratios, local dry-out occurred in the loop thermosyphon under a high input heat flux, leading to an increase in the thermal resistance. For high filling ratios, the average velocity of the fluid was augmented with the increase in heating power, while the liquid was capable of being replenished quickly in the heating section to avoid the dry-out. Therefore, the loop thermosyphon with high filling ratios enables a better heat transfer performance under a high heat flux than those with low filling ratios.

Visualization Research on a Pentane Loop Thermosyphon for Shaft Cooling

Experimental Investigation of Single Loop Thermosyphons Utilized in Motorized Spindle Shaft Cooling

Experimental Investigation into Rotating Loop Thermosyphons for Cooling Shafts of Motorized Spindles

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Investigation on Heat Transfer Performance of Loop Thermosyphon for Inner Cooling of Motorized Spindle

Numerical study on two-phase flow and heat transfer characteristics of loop rotating heat pipe for cooling motorized spindle

Experimental Investigation of an R600a Two-Phase Loop Thermosiphon to Cool a Motorized Spindle Shaft

Experimental Investigation on the Start-Up Characteristics of Single Loop Thermosyphon for Motorized Spindle Bearing-Shaft System Cooling

Thermal Performance of a R600a Two-Phase Loop Thermosiphon in Rotational Shaft

Experimental Investigation Of An R134a Loop Thermosiphon For Shaft Cooling

Visualized Investigation of Gas–liquid Stratified Flow Boiling of Water in a Natural Circulation Thermosyphon Loop with Horizontal Arranged Evaporator

Investigation of Heat Transfer and Flow Characteristics in Two-Phase Loop Thermosyphon by Visualization Experiments and CFD Simulations

Heat Transfer Characteristics and Operational Visualization of Two-Phase Loop Thermosyphon

Visualized-experimental investigation on a mini-diameter loop thermosyphon with a wide range of filling ratios

Experimental Investigations of the Influence Factors for the Boiling Heat Transfer Characteristics of R134a Coolant in a Loop Thermosiphon System

Experimental research on boiling heat transfer mechanism of a pump-driven loop thermosiphon for R134a coolant

Numerical simulation on the heat transfer characteristics of two-phase loop thermosyphon with high filling ratios

Visualization Investigation on Temperature Oscillation and Two-Phase Behaviors of A Flat Loop Heat Pipe

Analysis of the Two-Phase Flow, Heat Transfer, and Instability Characteristics in a Loop Thermosyphon

Experimental Study on the Heat Transfer Performance of Pump-assisted Capillary Phase-change Loop

Evaluation of R404a single loop thermosyphon for shaft cooling in motorized spindle