Abstract:The two-phase loop thermosyphon (TPLT) with a high filling ratio is considered an efficient heat transfer device and therefore has a good application prospect in the field of high heat flux dissipation engineering. However, the heat transfer mechanism of the TPLT with high filling ratios remains elusive. In this study, we establish a computational fluid dynamics (CFD) model of the loop thermosyphon. In order to accurately simulate boiling and condensation processes, we take into account the relationship between saturation temperature and pressure in the phase change model. There were two flow patterns, i.e., the bubbly flow and the slug flow, under low filling ratios in the heating section, in which the pool boiling dominates the main heat transfer mechanism, and dropwise condensation occurred in the condensation section. The driving force to propel the liquid during the vapor bubbles rise cannot be transferred to the liquid in the right tube, resulting in lower flow velocity. In stark contrast, the single-phase flow and the bubbly flow occurred periodically in the loop thermosyphon with high filling ratios, in which the dominant heat transfer mechanism is the flow boiling. The rising bubbles promote the clockwise flow of liquid in the loop like a pump. Because of the switch of the heat transfer mechanism, the average flow velocity increased, and the thermal resistance decreased. The minimum thermal resistance was 0.15 K/W under a filling ratio of 75%, and the maximum average velocity of the fluid was 0.19 m/s. Furthermore, we found a strong coupling relationship between the heat transfer performance and the flow characteristics of the loop thermosyphon. For low filling ratios, local dry-out occurred in the loop thermosyphon under a high input heat flux, leading to an increase in the thermal resistance. For high filling ratios, the average velocity of the fluid was augmented with the increase in heating power, while the liquid was capable of being replenished quickly in the heating section to avoid the dry-out. Therefore, the loop thermosyphon with high filling ratios enables a better heat transfer performance under a high heat flux than those with low filling ratios.

Convective Heat Transfer Motivated by Liquid-to-Vapor Density Difference in Centrifugal Force Field of Axially Rotating Loop Thermosyphons

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Numerical simulation on the heat transfer characteristics of two-phase loop thermosyphon with high filling ratios

Visualized Investigation of Gas–liquid Stratified Flow Boiling of Water in a Natural Circulation Thermosyphon Loop with Horizontal Arranged Evaporator

Experimental Investigations of the Influence Factors for the Boiling Heat Transfer Characteristics of R134a Coolant in a Loop Thermosiphon System

Experimental study on the effect of filling ratio on an R141b two-phase thermosyphon loop with a horizontal parallel tube evaporator

Visualization Research on a Pentane Loop Thermosyphon for Shaft Cooling

Numerical investigation of the thermal performance of a loop thermosyphon considering dynamic condensation mass transfer time relaxation parameter

Experimental research on boiling heat transfer mechanism of a pump-driven loop thermosiphon for R134a coolant

Optimized Liquid-Separated Thermodynamic States for Working Fluids of Organic Rankine Cycles with Liquid-Separated Condensation

Thermal characteristics of a two-phase loop thermosyphon with micro-grooved structures inside the evaporator

An experimental study of annular film flow condensation in a micro-fin tube with high mass flux

Heat Transfer Characteristics and Operational Visualization of Two-Phase Loop Thermosyphon

Visualized-experimental investigation on a mini-diameter loop thermosyphon with a wide range of filling ratios

Flow Boiling Heat Transfer of R134a in a Vertical Helically Coiled Tube

Experimental investigation on the heat transfer characteristics of loop thermosyphon with a micro-channel evaporator under low heat flux

Thermal design of a novel heat sink cooled by natural convection with phase transition in the series loop

Experimental investigation of two-phase thermosyphon loop for passive containment cooling

Condensation Heat Transfer Experiments of R410A and R32 in Horizontal Smooth and Enhanced Tubes