Abstract:The two-phase loop thermosyphon (TPLT) with a high filling ratio is considered an efficient heat transfer device and therefore has a good application prospect in the field of high heat flux dissipation engineering. However, the heat transfer mechanism of the TPLT with high filling ratios remains elusive. In this study, we establish a computational fluid dynamics (CFD) model of the loop thermosyphon. In order to accurately simulate boiling and condensation processes, we take into account the relationship between saturation temperature and pressure in the phase change model. There were two flow patterns, i.e., the bubbly flow and the slug flow, under low filling ratios in the heating section, in which the pool boiling dominates the main heat transfer mechanism, and dropwise condensation occurred in the condensation section. The driving force to propel the liquid during the vapor bubbles rise cannot be transferred to the liquid in the right tube, resulting in lower flow velocity. In stark contrast, the single-phase flow and the bubbly flow occurred periodically in the loop thermosyphon with high filling ratios, in which the dominant heat transfer mechanism is the flow boiling. The rising bubbles promote the clockwise flow of liquid in the loop like a pump. Because of the switch of the heat transfer mechanism, the average flow velocity increased, and the thermal resistance decreased. The minimum thermal resistance was 0.15 K/W under a filling ratio of 75%, and the maximum average velocity of the fluid was 0.19 m/s. Furthermore, we found a strong coupling relationship between the heat transfer performance and the flow characteristics of the loop thermosyphon. For low filling ratios, local dry-out occurred in the loop thermosyphon under a high input heat flux, leading to an increase in the thermal resistance. For high filling ratios, the average velocity of the fluid was augmented with the increase in heating power, while the liquid was capable of being replenished quickly in the heating section to avoid the dry-out. Therefore, the loop thermosyphon with high filling ratios enables a better heat transfer performance under a high heat flux than those with low filling ratios.

Assessing the enhancements in thermal performance of two-phase thermosyphon loops through riser wettability optimization

Visualized Investigation of Gas–liquid Stratified Flow Boiling of Water in a Natural Circulation Thermosyphon Loop with Horizontal Arranged Evaporator

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Experimental study on the thermal performance of a novel two-phase loop thermosyphon under low-heat-flux conditions

Study of the Natural Circulation Flow Boiling Heat Transfer Based On Partially Superhydrophilic Surface Modification

Numerical investigation of surface wettability effect on two-phase closed thermosyphon

Heat Performances of a Thermosyphon As Affected by Evaporator Wettability and Filling Ratio

Heat Transfer Characteristics and Operational Visualization of Two-Phase Loop Thermosyphon

Numerical investigation of the thermal performance of a loop thermosyphon considering dynamic condensation mass transfer time relaxation parameter

Coupling droplets/bubbles with a liquid film for enhancing phase-change heat transfer

Thermal characteristics of a two-phase loop thermosyphon with micro-grooved structures inside the evaporator

Visualization Research on a Pentane Loop Thermosyphon for Shaft Cooling

Experimental and CFD investigation on the thermal performance of two phase closed thermosyphons: Effect of corrugated evaporator

Numerical simulation on the heat transfer characteristics of two-phase loop thermosyphon with high filling ratios

Numerical investigation on transient and steady phase change heat transfer in the evaporator of a loop heat pipe

Experimental Study on the Heat Transfer Performance of Pump-assisted Capillary Phase-change Loop

Analysis of Wettability Effects on Thermal Performance of Vapor Chamber with a Hybrid Lattice Boltzmann Method

The Influences of the Inclination Angle and Evaporator Wettability on the Heat Performance of a Thermosyphon by Simulation and Experiment

Visualization and heat transfer comparative analysis of two phase closed thermosyphon

Start-up Investigation and Heat Transfer Enhancement Analysis of a Loop Thermosyphon with Biomimetic Honeycomb-Channel Evaporator

Experimental study on the effect of filling ratio on an R141b two-phase thermosyphon loop with a horizontal parallel tube evaporator