Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

Numerical Simulation of Hardfacing Remanufacturing for Large-Scale Damaged Grinding Roller

A novel method for competitive failure behavior and mechanical degradation online monitoring of laser additive work roll under multidimensional damage

Numerical simulation method of submerged arc surfacing process of rollers

Multi-field coupling numerical simulation and experimental research of submerged arc surfacing process on the descaling rolls with different wall thickness

Numerical Simulation for the Residual Stresses of Stellite Hard-Facing on Carbon Steel

Cold-Source Composite Welding Repair of 9Cr2Mo Thick-Walled Parts: Microstructure, Mechanical Properties, and Finite Element Simulation

Numerical Simulation of Thermal Field and Performance Study on H13 Die Steel-Based Wire Arc Additive Manufacturing

Numerical Simulation of Residual Stress in 10ni5crmov Steel Weldments

Numerical Simulation of Temperature Field and Residual Stress Distribution for Laser Cladding Remanufacturing

Numerical studies on the parameter effect and controlling method of the residual stress in the remanufactured 17CrNiMo6 heavy-duty gear by the laser cladding deposition

On Residual Stress and Relief for an Ultra-Thick Cylinder Weld Joint Based on Mixed Hardening Model: Numerical and Experimental Studies

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Numerical simulation of two-track laser hardening process of 42CrMo steel

FEM simulation of thermo-mechanical stress and thermal fatigue life assessment of high-speed steel work rolls during hot strip rolling process

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

Prediction of Surface Wrinkle Defect of Welding Wire Steel ER70S-6 in Hot Bar Rolling Process Using Finite Element Method and Experiments

Damage and Fatigue Life Evaluation for Laser Cladding Remanufactured Wheel

Effect of Microstructure on Local Strain Hardening Behavior along an Equal Toughness Matching Welded Joint of a 30cr2ni4mov Welded Rotor

Numerical Study of the Thermodynamic Behavior and Wear on the Surface of Hot-Rolling Descaling Roll

Microstructure and Hardness Characteristics of Swing-Arc SAW Hardfacing Layers

STUDY ON SURFACING MATERIALS AND TECHNOLOGY FOR HOT ROLLING MILL ROLLS