Abstract:Large residual stresses in a laser-cladded surface coating over a metal part are detrimental to its mechanical integrity and fatigue life. In this study, a three-dimensional uncoupled thermo-mechanical finite element model was developed to predict (a) the evolution of the temperature field in a direct diode laser hot-wire multi-track cladding process and (b) associated thermally induced residual stress distribution in laser-cladded 316L stainless steel coatings on the A36 mild steel substrate. The thermal analysis of the finite element model of the laser cladding process was first validated by the time-resolved temperature measurements using thermocouples placed on the mild steel surface near the clad layer. The stress analysis of the finite element model during the cooling stage was then validated by the spatially-resolved X-ray diffraction measurements of residual stresses in the clad layer. The experimentally validated finite element model was then applied to investigate the effect of laser power, material properties (Young's modulus, yield strength, and coefficient of thermal expansion), and the number of clad tracks on the residual stresses in the clad layer. It was found from the numerical simulations that the magnitude of residual stress components increases with increasing Young's modulus, yield strength, and coefficient of thermal expansion of the clad material. A higher temperature gradient located in the molten pool induced a higher concentration of thermal stresses and eventually a higher residual stress level in the clad samples. Higher tensile residual stress was generated with an increasing number of clad tracks although the residual stress in the existing clad tracks was relaxed somewhat during the subsequent cladding process of new tracks. Specifically, high tensile transverse residual stress formed in the overlapped region and on both sides of the clad layer, whereas higher longitudinal and von Mises equivalent residual stresses were developed in the last clad track. The finite element analysis results presented in this study may provide useful guidance for reducing the residual stresses in clad layers by optimizing the multi-track laser cladding processing parameters.

Numerical studies on the parameter effect and controlling method of the residual stress in the remanufactured 17CrNiMo6 heavy-duty gear by the laser cladding deposition

Effect of Residual Stress Induced by Different Cooling Methods in Heat Treatment on the Fatigue Crack Propagation Behaviour of GH4169 Disc

Numerical Simulation of Temperature Field and Residual Stress Distribution for Laser Cladding Remanufacturing

Finite Element Numerical Simulation and Repair Process of Laser Cladding Repair of Surface Cracks on Mechanical Parts

The study of hot deformation on laser cladding remanufactured 316L stainless steel

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Effect of turning-induced initial roughness level on surface roughness and residual stress improvements in subsequent burnishing

Quantitative analysis and experimental study of the influence of process parameters on the evolution of laser cladding

Residual Stress Prediction for a Coated Tunnel Boring Machine Cutter considering the Effects of Heat Treatment and Laser Cladding

Study on the reduction of residual stress in laser cladding layers through groove texture

Effect of Laser Energy Density and Scanning Strategy on Residual Stress in Laser Melting Deposited FGH4096 Superalloy

A 3D finite element analysis of thermally induced residual stress distribution in stainless steel coatings on a mild steel by laser hot wire cladding

Numerical Simulation and Experimental Analysis of Thermal Conduction and Stress in Laser Cladding Repair of Thin-Walled Parts

Numerical Simulation of Hardfacing Remanufacturing for Large-Scale Damaged Grinding Roller

Thermal mechanical modeling and residual stress prediction for laser direct energy deposition of 30CrNi2MoVA steel considering solid-state phase transformation

Numerical research on effect of overlap ratio on thermal-stress behaviors of the high-speed laser cladding coating*

Investigation on the effect of laser remelting for laser cladding nickel based alloy

Residual stress analysis of TC4/Inconel718 functionally graded material produced by laser additive manufacturing based on progressive activation element method

Damage and Fatigue Life Evaluation for Laser Cladding Remanufactured Wheel

The effects of laser peening on laser additive manufactured 316L steel

Multi-physics field coupling and microstructure numerical simulation of laser cladding for engine crankshaft based on CA-FE method and experimental study