Abstract:Additive manufacturing (AM)'s ability to produce customized products with reduced material wastage and other advantages helped the technology to gain popularity in many industries. However, its poor surface integrity is its weak side, and to overcome this, additional post-processes are essential. Slide diamond burnishing, known for its enhancement of surface roughness, residual stress, microhardness, and other properties, was combined with grinding in this research after 3D printing of MetcoAdd 17-4PH-A to mitigate the mentioned shortcomings. This study aimed to analyze the effects of each process on surface roughness, residual stress (both on the surface and in-depth), and microhardness. Workpieces were ground with the same parameters and burnished with four levels of force, feed, and number of passes. The L16 Taguchi experimental design was used to optimize the process parameters and to study their effects. For surface roughness, the optimum parameters were found to be 60 N force, 0.02 m/min feed rate, and three passes. The longitudinal surface residual stress has optimal values at 80 N force, 0.02 m/min feed rate, and four passes. In the case of transverse surface residual stress, the optimal values were 60 N force, 0.17 m/min feed rate, and three passes. Microhardness was maximized with 60 N force, 0.02 m/min feed rate, and one pass. Additionally, the in-depth residual stress for selected surfaces was investigated, and 100 N force showed a deep burnishing effect. Further multi-objective optimization using desirability function analysis found that the optimal parameters for all responses were achieved at the fourth burnishing force level (100 N), the first tool feed level (0.02 m/min), and the fourth number of passes level (four passes). Ultimately, both grinding and burnishing processes exhibited significant enhancements in the measured parameters.

Effect of turning-induced initial roughness level on surface roughness and residual stress improvements in subsequent burnishing

Improving the surface integrity of laser cladded layer by ultrasonic-assisted burnishing at medium temperature with considering initial surface conditions

Numerical studies on the parameter effect and controlling method of the residual stress in the remanufactured 17CrNiMo6 heavy-duty gear by the laser cladding deposition

Study on the reduction of residual stress in laser cladding layers through groove texture

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

A review of recent advances in integrated laser remelting and laser cladding processes

Improving surface integrity by optimizing slide diamond burnishing parameters after hard turning of 42CrMo4 steel

Impact of Ultrasonic Surface Rolling Processes on Microstructures and Fatigue Properties of 300M Steel Laser-Cladding-Repaired Components

Investigation on the effect of laser remelting for laser cladding nickel based alloy

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

Research on hybrid remanufacturing process chain of laser cladding, CNC machining and ultrasonic rolling for aero-engine blades

The study of hot deformation on laser cladding remanufactured 316L stainless steel

Effect of Initial Surface Morphology and Laser Parameters on the Laser Polishing of Stainless Steel Manufactured by Laser Powder Bed Fusion

A review of low plasticity burnishing and its applications

Equal–Additive–Subtractive Remanufacturing Integrated Laser Directed Energy Deposition with Shot Peening and Machining Induced High Performance of Plunger Rod

Optimization of Process Parameters, Microstructure, and Properties of Laser Cladding Fe-Based Alloy on 42CrMo Steel Roller

Precipitation Behaviour And Its Strengthening Effect Of Maraging Steel In Laser Cladding Remanufacturing

Achieving high surface integrity of Fe-based laser cladding coating by optimized temperature field-assisted ultrasonic burnishing

Investigation on repairing 30CrMnSiNi2A steel with laser additive and subtractive hybrid remanufacturing technology

A novel comprehensive framework for surface roughness prediction of integrated robotic belt grinding and burnishing of Inconel 718

Characterization of Surface Integrity of 3D-Printed Stainless Steel by Successive Grinding and Varied Burnishing Parameters