Abstract:Honing is an important technology for machining onboard system parts. The parts are usually made of difficult-to-machining materials, e.g., Inconel 718 superalloy. Honing can improve the finishing accuracy and surface quality. However, the selection of the honing parameters was primarily based on the results of a large number of experiments. Therefore, the establishment of a reliable model is needed to predict the honed surface roughness and morphology, and offers a theoretical direction for the choice of parameters. In the present study, a numerical simulation model was constructed for analysis of the honing process by Python. The oilstone, workpiece surface morphology and motion trajectory were discretized by Python, and the machined surface was obtained by trajectory interference. Firstly, based on the statistical analysis of the surface topography of oilstone, the shape of grains was simplified and the surface topography of oilstone was built accordingly. Then, the initial surface morphology of the workpiece was constructed and the trajectory of grains on the workpiece surface was analyzed, which showed the distribution of the removed material. Meanwhile, the plastic deformation of material was analyzed in the simulation model. The critical depth of three stages of contact between grains and workpiece was calculated by the theoretical formula: scratching, ploughing and cutting. By analyzing the distribution of bulge, the plastic deformation in ploughing and cutting stage was studied. Further, the simulated results of honed surface roughness and morphology were validated and agreed reasonably well with the honing experiment. Finally, the effects of honing process parameters, including grain size, tangential speed, axial speed, radial speed and abrasive volume percentage, on the surface roughness of the workpiece were analyzed by the simulation model.

A novel comprehensive framework for surface roughness prediction of integrated robotic belt grinding and burnishing of Inconel 718

An Intelligent Prediction of Surface Roughness on Precision Grinding

A comprehensive study on surface integrity of nickel-based superalloy Inconel 718 under robotic belt grinding

Surface Integrity Improvement of the Ground Surface of Inconel 718 Fabricated by Forging and Additive Manufacturing Using a Robotic Rotational Burnishing Method

Analysis of Gradient Features and Strengthening Mechanisms of the Inconel 718 Surface Layer under Robot Belt Constant-Force Grinding

An Investigation of Surface Corrosion Behavior of Inconel 718 after Robotic Belt Grinding

Comprehensive Investigations into the Force and Thermal Characteristics of Belt Grinding Inconel 718 under Constant Normal Forces

A novel material removal prediction method based on acoustic sensing and ensemble XGBoost learning algorithm for robotic belt grinding of Inconel 718

A Comprehensive Investigation into the Mechanism of Belt Wear Influencing Heat Partition Ratio Through Force and Temperature Analysis During Robotic Belt Grinding Inconel 718

Roughness Prediction and Performance Analysis of Data-Driven Superalloy Belt Grinding

Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718

Real-time surface roughness estimation and automatic regrinding of ground workpieces using a data-driven model and grinding force inputs

Analytical modeling of surface generation in ultrasonic ball burnishing including effects of indentation pile-up/sink-in and chipping fracture

Minimization of Surface Roughness and Residual Stress in Grinding Operations of Inconel 718

Numerical analysis and experimental validation of surface roughness and morphology in honing of Inconel 718 nickel-based superalloy

Thermal Analysis of Belt Grinding Process of Nickel-Based Superalloy Inconel 718

Multi-Objective Optimization of Surface Integrity in the Grind-Hardening Process

A New Method to Achieve Dynamic Heat Input Monitoring in Robotic Belt Grinding of Inconel 718

Introducing abrasive wear into undeformed chip thickness modeling with improved grain kinematics in belt grinding

Analysis and prediction of surface roughness for robotic belt grinding of complex blade considering coexistence of elastic deformation and varying curvature

A high-precision prediction model of surface roughness in abrasive belt flexible grinding of aero-engine blade