Abstract:The combined hydrometallurgical and pyrometallurgical process is an innovative method for recycling spent batteries. This process includes a carbothermic reduction step that reduces the valence of valuable metals in the batteries, facilitating subsequent leaching, which is a crucial stage in the recycling process. Additionally, the use of new carbon materials in electrode materials for ternary lithium batteries, referred to as LIBs, is increasing. These materials typically have high porosity and a large specific surface area. In this study, two types of nanoporous carbon (NC) commonly used in electrodes, namely Al-PCP-800 and ZIF-8–800, were prepared to investigate their effects on the carbothermic reduction stage of recycling spent batteries. The carbothermal reduction reactions of spent LIBs powder mixed with activated carbon and the two types of NC were examined using a thermogravimetric balance (TG/DTG). Kinetic characteristics were calculated in the interval of maximum weight loss rate using five kinetic models: VM, RPM, URCM, KAS, and FWO. The kinetic analysis revealed that the KAS and FWO models, which exhibited higher correlation coefficients, more accurately described the carbothermic reduction reactions. TG analysis showed that the sample mixed with 25 % ZIF-8–800 achieved the lowest temperature at the weight loss peak for the maximum weight loss rate, 769°C at a heating rate of 20 °C/min. Additionally, the reaction activity of NC with the positive material in the spent LIBs powder was stronger than that of activated carbon. Among the models, the sample mixed with 25 % ZIF-8–800 exhibited the lowest activation energies, recorded at 171.83, 28.48, 122.22, 199.49, and 143.45 kJ/mol, respectively. XRD and XPS characterizations of the roasted products from the spent LIBs powder mixed with the three carbon materials at various roasting end temperatures demonstrated that the cathode materials initially decomposed into Mn 3 O 4 , NiO, CoO, Li 2 O, and Li 2 CO 3 . At higher temperatures, Mn 3 O 4 , NiO, and CoO were further reduced to MnO, pure metallic Co, and pure metallic Ni, respectively. The sample mixed with ZIF-8–800 showed the most substantial reduction of metallic elements, with the relative contents of pure metallic Ni, pure metallic Co, and low-valent Mn elements reaching 5.50 %, 4.41 %, and 71.29 %, respectively, at a final roasting temperature of 800 °C. Therefore, NC demonstrated greater reactivity in the reduction reactions with the cathode material in the spent LIBs powder, ranking in the order of ZIF-8–800 > Al-PCP-800 > activated carbon.

Unveiling the Control Mechanism of the Carbothermal Reduction Reaction for Waste Li-Ion Battery Recovery: Providing Instructions for Its Practical Applications

Thermodynamic and experimental analysis of lithium selectively recovery from spent lithium-ion batteries by in-situ carbothermal reduction

Study of reaction characteristics and controlling mechanism of chlorinating conversion of cathode materials from spent lithium-ion batteries

An innovative strategy for spent LiCoO 2 battery recycling based on chemical looping complementary reduction

Process Development for the Recycle of Spent Lithium Ion Batteries by Chemical Precipitation

A high-efficiency and low-carbon strategy for selective lithium recovery from spent lithium-ion batteries: Combining mechanochemical activation with biomass reduction roasting

Carbothermal reduction between MOF-derived carbon and spent battery powder for metal recovery: Thermogravimetric behavior and kinetic analysis

Revealing the delithiation process of spent LiMn2O4 and LiNi0.6Co0.2Mn0.2O2 batteries during the biomass-assisted gasthermal and carbothermal reduction

Fundamental thermokinetic study of a sustainable lithium-ion battery pyrometallurgical recycling process

Novel Approach for in Situ Recovery of Lithium Carbonate from Spent Lithium Ion Batteries Using Vacuum Metallurgy.

Early-stage recovery of lithium from spent batteries via CO2-assisted leaching optimized by response surface methodology

Enhanced Leaching of Metals from Spent Lithium-Ion Batteries by Catalytic Carbothermic Reduction

Converting spent lithium cobalt oxide battery cathode materials into high-value products via a mechanochemical extraction and thermal reduction route

Alkali Metal Salt Catalyzed Carbothermic Reduction for Sustainable Recovery of LiCoO2: Accurately Controlled Reduction and Efficient Water Leaching

Efficient separation and recovery of lithium through volatilization in the recycling process of spent lithium-ion batteries

Pyrolysis kinetics and reaction mechanism of the electrode materials during the spent LiCoO2 batteries recovery process

Microthermal catalytic aerogenesis of renewable biomass waste using cathode materials from spent lithium-ion batteries towards reversed regulated conversion and recycling of valuable metals

Towards integration of pyro- and hydrometallurgical unit operations for efficient recovery of battery metals from waste lithium-ion batteries

Electrochemical technology to drive spent lithium-ion batteries (LIBs) recycling: recent progress, and prospects

Achieving low-temperature hydrothermal relithiation by redox mediation for direct recycling of spent lithium-ion battery cathodes

Crystal phase and nanoscale size regulation utilizing the in-situ catalytic pyrolysis of bamboo sawdust in the recycling of spent lithium batteries