Abstract:<p>Recently, an increasing number of small satellites have chosen electric propulsion (EP) as the propulsion system for motion control in space flights. Research on the ejected high energy plasma plumes from EP thrusters has attracted significant interest due to their interactions with the components of satellites. This work demonstrates a probe array diagnostic platform (with 67 Faraday probes on the array) that enables the acquisition of the full three-dimensional morphology of the plume current density from the near-field to the far-field of EP stationary thrusters. The plume parameters of an ion thruster including the 3-D plume morphology, divergence angle, and thrust vector angle are measured using this diagnostic platform. From 250 to 700 mm from the thruster exit, the plume field exhibits a stable divergence angle of 43.6°. By fitting circles to the contours of each cut plane, the average thrust vector angle is calculated to be 1.3°, and the repeatability error for the circle center fitting is approximately 2.2%. The current density profiles on exit cut planes demonstrate an "elliptical distortion" phenomenon in the plume shape. Using the ellipse fitting method, it is found that an elliptical shape was formed in the near-field of the plume. As the plume propagates to the far-field, the distortion of the ellipse becomes more apparent (the aspect ratio is 1:1.14). Some possible causes may be the geo-magnetic field, background vacuum environment distribution, or thruster manufacturing error. The thrust vector data can provide a basis for the control strategy of the satellites. In addition, the 3-D plume current density data can give us a comprehensive understanding of the plume plasma physics. These results may also provide an accurate and rich database for parameters for future plume simulations.</p>

Probe method to measure the electromagnetic field in a plasma by Poynting vector conversion

Design of a Unidirectional Reception and High Temperature Resistance Electric Field Probe for Measuring the Internal Electric Field of Plasma

Application of Langmuir probe in high frequency plasma wind tunnel

Measurement of the Electron Density of a Wind-Tunnel Plasma Using a Double Flush-Mounted Probe

Electron density measurement of an ionospheric-like plasma using an impedance probe

Electrostatic Probe Diagnosis on the Plasma in the Discharge Chamber of an Electron Cyclotron Resonance Ion Thruster

Monopole Antenna Probe for Density Measurements in Cold Plasmas

High-speed plasma measurements with a plasma impedance probe

Mapping electromagnetic fields structure in plasma using a spin polarized electron beam

Application of microwave resonator probe in the measurement of plasma density

Microwave Plasma Thruster Plume Diagnosis Using Microwave Interference Method

A High-Frequency and High Spatial Resolution Probe Design for EMI Prediction

An Economic Real-Time Microwave Plasma Impedance Measurement Method

An Ultrafast Reciprocating Probe.

Automatic Emissive Probe Apparatus for Accurate Plasma and Vacuum Space Potential Measurements

Three-dimensional measurement of a stationary plasma plume with a Faraday probe array

Experimental and Simulational Studies on the Theoretical Model of the Plasma Absorption Probe

Microwave probe method to research plasma density of arc-heated tunnel

FAST SCANNING PNEUMATIC-DRIVEN ELECTROSTATIC PROBE MEASUREMENT SYSTEM

Research on Plasma Electron Density Distribution Based on Microwave Diffraction

Plume Plasma Measurements of a 20cm Xenon Ion Thruster Using a Multiple-Probe Array IEPC-2015-222 / ISTS-2015-b-222