Abstract:Electrical probe measurements are carried out at the scrape‐off‐layer (SOL) and divertor regions in order to investigate the characteristics of edge plasmas during H‐mode discharges in the Korea Superconducting Tokamak Advanced Research (KSTAR) device. Radial profiles of plasma parameters such as electron temperature Te, plasma density ne, and parallel flow velocity v‖ are measured by using a fast reciprocating Langmuir probe assembly (FRLPA) at the SOL region. From the FRLPA measurements, it is found that the decay length of temperature λTe and that of density λne are 2 ∼ 4 cm and 1 ∼ 3 cm, respectively. The magnitude of v‖ near the last closed flux surface (LCFS) is 4 ∼ 15 km/s. The radial flux due to edge turbulence at the SOL region is investigated by using spectra analysis on electrostatic fluctuation levels such as ion saturation current Ĩis and floating potential $ \tilde{\rm V}_f$ obtained from the FRLPA measurement. The value of the flux is estimated as ∼ 1020 particle m−2 s −1 near the LCFS. The poloidal distribution of the ion saturation current density jis is measured by fixed edge Langmuir probe array (ELPA) at the divertor region, and it is found that the positions of strike points from the ELPA measurement agree well with those reconstructed from the EFIT result using magnetic diagnostic data. From the spectrum analysis on the ELPA measurements at the divertor region during edge localized modes (ELMs) control in the H‐mode discharges, it is observed that the magnitude of $ \tilde{\rm j}_{is}$(ω) near strike point decreases when the ELMs are suppressed or mitigated (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

An Ultrafast Reciprocating Probe.

Electric Probe Measurements at Edge Region During H‐Mode Discharges in KSTAR

Investigations of Plasma Response Associated with Resonant Magnetic Perturbation Fields Using Perturbation Method in KSTAR H-mode Plasmas

Propagation Dynamics Associated with Resonant Magnetic Perturbation Fields in High-Confinement Mode Plasmas Inside the KSTAR Tokamak.

A magnetically driven reciprocating probe for tokamak scrape-off layer measurements

A new probe design to measure plasma properties and toroidal correlations on the EAST

Fast radial scanning probe system on KTX

Movable Multi-Probes For Plasma Boundary Measurement In Sino-United Spherical Tokamak

All-in-one probe for exploring self-organized two-fluid equilibria in toroidal plasmas

An octahedral Mach B-dot probe for 3D flows and magnetic fields in the edge of reversed field pinches

Probe method to measure the electromagnetic field in a plasma by Poynting vector conversion

Development of a Thin High-Frequency and High-Precision Magnetic Probe Array in Sino-United Spherical Tokamak

Fast sweeping probe system for characterization of spokes in E × B discharges

Design, construction, and calibration of a three-axis, high-frequency magnetic probe (B-dot probe) as a diagnostic for exploding plasmas

The Eddy Current Probe Array for Keda Torus Experiment.

A newly designed actively water-cooled Langmuir probe for tokamak devices

Spatial measurement in rotating magnetic field plasma acceleration method by using two-dimensional scanning instrument and thrust stand

Design of Magnetic Measurement System on Sunist Spherical Tokamak

Langmuir probe diagnostic suite in the C-2 field-reversed configuration

Development of high-frequency magnetic probe for plasma diagnostics of XuanLong-50

Design and calibration of high-frequency magnetic probes for the SUNIST spherical tokamak