Abstract:Hall-effect thrusters (HET) are a stationary form of electric propulsion that have been widely used in space missions. However, the wide range of the divergence angle of the HET plasma plume and the high ion velocities can result in a large area where collisions and plume interactions occur. Of these, low-energy charge-exchange (CEX) ions typically originate from collisions, and can result in severe deposition and sputtering issues on spacecraft components. In this work, we propose a novel magnetic Faraday probe in coordination with a particle-in-cell (PIC) simulation code. This system is able to deflect CEX ions with a changing solenoid current, and can be used to obtain the ion density and energy levels of CEX ions through experimental measurements. In addition, a Faraday probe, a retarding potential analyzer (RPA), and a Langmuir probe were used to obtain the beam characteristics. The CEX ion density at the beam edge area was determined to be in the level of 2.54 × 1012 m−3 (the local ion density of the plasma plume is in the level of 1013 m−3), and the ion energy level at the beam edge area was found to be below 30.1 eV. Due to the difference in the vacuum levels between ground tests and in-space operation, CEX collisions will be more severe during ground tests, and can affect plume measurements and erosion of the thruster. Two different vacuum levels were tested experimentally here to study the relationship between CEX ions and the background neutrals. As a result, it was found that a high background neutral density can exacerbate CEX collisions at the beam edge area, which results in an increase in the CEX ion density and a decrease in the CEX ion energy. This study brings us new information on the CEX ion density and energy distribution at the beam edge area from an experimental point of view. Furthermore, data on CEX ions energy can be used as input data for future plume simulations.

Study of plasma parameters in high enthalpy ICP-heated wind tunnel by using single Langmuir probe

Measurement on Electron Density of High-Power and Large-Volume ICP-heated Wind Tunnel with HCN Laser Interferometer

Analysis of thermal plasma diagnostics based on enthalpy probe system

Investigation on the electron density and temperature in a nanosecond pulsed helium plasma jet with Thomson scattering

Research on Low Pressure Electronic Density Diagnostic Method of Single Paperback Probe Based on Langmuir Probe Theory

Plasma Characterization of a Test Setup of RF-driven Negative Ion Source by a Langmuir Probe System

Electron density measurements in low-pressure plasmas using cutoff probes and comparison with hairpin and Langmuir probes

Real Time Measurement of Electron Temperature using Coupled Center Tapped Emissive and Langmuir Probe (CCTELP)

Electron density measurement of an ionospheric-like plasma using an impedance probe

2d Electron Density Profile Measurement In Tokamak By Laser-Accelerated Ion-Beam Probe

Deuterium Plasma Diagnosis in a Miniature Penning Ion Source by a Single Probe

Improved analysis techniques for cylindrical and spherical double probes

Probe method to measure the electromagnetic field in a plasma by Poynting vector conversion

Comparative studies of cold/hot probe techniques for accurate plasma measurements

Optical Fiber Interferometer Application for High Electron Density Measurements on Compact Torus Plasmas.

Measurement of the distribution of charge exchange ions in a Hall-effect thruster plume

Experimental and Simulation Investigation of Electrical and Plasma Parameters in a Low Pressure Inductively Coupled Argon Plasma

Long-time Measurements of Line-Integrated Plasma Electron Density Using a Two-Color Homodyne Optical Fiber Interferometer

Investigation on a Low Pressure Plasma Jet in an Inductively Coupled Plasma

A Method to Correct the Characteristic Curve of a Langmuir Probe and the Possibility to Measure Plasma Electron Temperature Through Ion-Acoustic Waves

Langmuir Probe Diagnosis of a Cold Atmospheric Plasma Jet