Abstract:Plate impact experiments are conducted on cemented tungsten carbides (WC) with a 3.7 and 6.0 wt. % cobalt binder to better understand their dynamic, high-pressure response to 100 GPa. The measured wave profiles show propagation of steady structured waves. Standard impedance matching procedures are used to determine the Hugoniot relations in the shock velocity–particle velocity (Us−vp) and Hugoniot stress–specific volume (P−V/Vo) planes. The Hugoniot elastic limit of the samples is controlled by ductility of the Co binder and is determined to be 4.45 ± 0.29 GPa for cemented WC with 3.7 wt. % cobalt and 3.72 ± 0.24 GPa for a 6.0 wt. % cobalt binder. Both grades show a non-linear Us–vp relationship depending on whether the particle velocity is in the strength dominated or hydrodynamic regime. In the strength dominated regime, a non-linear decrease in Us is observed as vp increases from ambient to the material’s hydrodynamic limit. In the hydrodynamic regime, the Us–vp Hugoniot is linear and is determined to be Us=4.97(±0.006)+1.446(±0.018)vp km/s for WC with 3.7 wt. % Co and Us=4.93(±0.006)+1.463(±0.017)vp km/s for 6 wt. % Co. Both WC grades indicate shear-stress hardening with mean stress immediately after yield, followed by pressure softening, and then a sharp fall in stress carrying capacity as the mean stress is increased to ≈70 GPa (hydrodynamic limit) and beyond. This behavior is in contrast to pure WC ceramics, which show continued shear-stress hardening with mean stress to ≈80 GPa.

Shock Response of Micro-Grained Diamond-Sic Composite

Shock Compression of Diamonds in Silicon Carbide Matrix Up to 110 GPa

Elastic Property of SiC-Diamond Composite under Hydrostatic Pressure

Nanostructured Diamond-Tic Composites with High Fracture Toughness

Dynamic Impact Strength of Diamond-Sic Superhard Composite

Enhancing Dynamic Strength of Diamond-Sic Composite: Design and Performance

Dynamic response of Ti3SiC2 under shock compression up to 112 GPa

Micron Diamond Composites with Nanocrystalline Silicon Carbide Bonding

Shock compression of cemented tungsten carbides to 100 GPa: Structure of shock waves, Hugoniot relations, and strength

Sintering and Toughening Behavior of Dense SiC-coated Diamond Dispersed WC/Co Composites(Materials, Metallurgy & Weldability)

Enhancement Of Fracture Toughness In Nanostructured Diamond-Sic Composites

Strength of diamond beyond the elastic limit under dynamic compression

Superhard Diamond/Tungsten Carbide Nanocomposites

Metastable Carbon at Extreme Conditions

Diamond–SiC nanocomposites sintered from a mixture of diamond and silicon nanopowders

Atomistic simulations of shock waves in cubic silicon carbide

Superhard Composites of Cubic Silicon Nitride and Diamond

Preparation and Interfacial Microstructure of High Thermal Conductivity Diamond/sic Composites

Properties evolution and damage mechanism of SiC/SiC composites after thermal shock at 1300 °C

Microstructure and Thermal Shock Resistance of Zr7/8Ti1/8B2-20 Vol% SiC Composites Synthesized by Mechanical Alloying and Spark Plasma Sintering

Experimental and theoretical investigation of failure mechanism in Al 2 O 3 /SiC composite under plane shock waves