Abstract:Since the global outbreak of the COVID-19, the requirement for ultra-low temperature medical freezers has increased rapidly. Joule-Thomson refrigeration systems, known for their simple structure and low cost, are an excellent choice for ultra-low temperature medical freezers. To further improve the performance of JouleThomson system for large-capacity ultra-low temperature freezer, this study conducted a series of experiments on the performance of a ternary hydrocarbon mixture R1150/R290/R601a. The impacts of refrigerant charge, capillary tube size, compressor speed, and environmental temperature on the steady-state and dynamic performance were investigated in detail. The results showed that under a fixed system configuration and charge, the freezer can achieve an ultra-low temperature of -82.2 degrees C and a COP of 0.256 at an environmental temperature of 25 degrees C, while maintaining a low compressor pressure ratio not exceeding 12. Furthermore, the matching relationship between capillary size and charge was emphatically studied, and it was found that the optimal refrigerant charge increased as the inside diameter of the capillary tube decreased or its length increased. The inside diameter had a more significant effect on system performance than the length. The suitable charge was 225-275 g for capillary tubes with an inside diameter of 1.4 mm, and increased to 400-450 g for an inside diameter of 0.7 mm. In addition, the experiments with various compressor speeds indicated that, before the cabinet temperature dropped to -40 degrees C, the variation of compressor speed had little effect on the pull-down rate. However, the higher the compressor speed, the lower the cabinet temperature that can be achieved. When the speed was 3500 rpm, the system achieved its lowest daily energy consumption, which was 8.42 kW & sdot;h/24 h.

Experimental Research on a Joule-Thomson Refrigeration Cycle with Mixture R170/R290 for −60 °C Low-Temperature Freezer

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

Experimental Study on an Absorption Refrigeration System at Low Temperatures

Performance Evaluation of an Ejector Subcooling Refrigeration Cycle with Zeotropic Mixture R290/R170 for Low-Temperature Freezer Applications

Binary Hydrocarbon Mixtures of Joule-Thomson Refrigeration Cycle Based for -70°C Freezer: Theoretical and Experimental Evaluation

Performance Analysis of a Modified Zeotropic Mixture (R290/R600) Refrigeration Cycle with Internal Subcooler for Freezer Applications

EXPERIMENTAL STUDY ON A NEW ABSORPTION REFRIGERATION SYSTEM USING R134a+R32/DMF 1

Performance Evaluation of a Modified Refrigeration Cycle with Parallel Compression for Refrigerator-Freezer Applications

EXPERIMENTAL STUDY ON A NEW ABSORPTION REFRIGERATION SYSTEM USING R134a+R32/DMF

Experimental Study on the Characteristics of R1150/R600 Mixed Refrigerant Joule-Thomson Low-Temperature Freezer

Experimental Study on Performance Characteristics of a -70 °C Ultra-Low Temperature Medical Freezer with Mixed Hydrocarbon Refrigerant

Experimental Study on Joule-Thomson Refrigeration System with R1150/R290/R601a for Ultra-Low Temperature Medical Freezer

Experimental investigation of a bypass two-circuit cycle refrigerator-freezer with low GWP zeotropic refrigerants

Thermodynamic Analysis of a Novel Vapor-Injection Joule-Thomson Refrigeration Cycle with a Binary Hydrocarbon Mixture for −86 °C Freezer

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Experimental Research on -60℃ Refrigerator

Experimental investigation on pulse tube refrigerator with binary mixtures

Analysis of Features of J-T Refrigeration Cycles Using Mixed Refrigerants with an Infinite Low Temperature Heat Reservoir

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle with R170/R290 for Freezers Application

Thermodynamic Performance Optimization and Analysis of an Auto-Cascade Refrigeration Cycle with Vapor Injection for Ultra-Low Temperature Freezer