Abstract:A high-selectivity bandpass filter (BPF) based on two merged ring resonators is presented in this paper. The structure of this proposed BPF can be seen as the two one-wavelength ring resonators merged each other by sharing the common lambda(g)/2 microstrip line. Due to symmetric structure, it can be analyzed by even- and odd-mode method and the locations of six transmission zeros are calculated using input impedance deductions. For further demonstration, a BPF example centered at 2 GHz is fabricated with high frequency selectivity. The measured 3-dB fractional bandwidth is 11% (1.89-2.11 GHz) and insertion loss is less than 2 dB in the passband. Good agreement between simulation and measurement verifies the feasibility of the design method. this method is at the expense of a large circuit size. Besides, several novel structures are introduced to achieve higher performance, such as two pairs of twist modified split-ring resonators [8] and stepped impedance open-stub loaded ring resonator [9]. In this paper, a BPF based on two merged ring resonators with high selectivity is proposed, which is quite different from the BPF using ring resonators in [10]. Due to the symmetric structure of this proposed BPF, the distributions of six TZs can be calculated by odd-and even-mode method. The theoretical derivation of the proposed BPF is demonstrated. For validation, a BPF example centered at 2 GHz is fabricated and measured.

Dual‐band Bandpass Filter Using Two Simple Coupled Microstrip Rings

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Planar dual- and tri-band bandpass filters using single improved ring resonator and simple feed scheme

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Dual-mode microstrip bandpass filter using circular patch resonator with two transmission zeros

High-Selectivity Bandpass Filter Based on Two Merged Ring Resonators

Compact Dual‐band Bandpass Filter Using Coupled Lines and Shorted Stubs

Compact Dual-Band Bandpass Filter and Diplexer Using Hybrid Resonant Structure with Independently Controllable Dual Passbands

Microstrip Multi-Band Bandpass Filters Using a Single Improved Ring Resonator

Dual-Band Bandpass Filter With Controllable Stopband Bandwidth

Coupled‐line Band‐pass Filter with T‐shaped Structure for High Frequency Selectivity and Stopband Rejection

Microstrip dual-mode bandpass filter design using pie-section truncated semi-circle and quarter-circle resonators

Compact dual-band bandpass filter using simply hybrid structures

Compact Dual‐band Bandpass Filter Using Meander Short‐circuit Quarter‐wavelength Resonators

Bandpass Filter Using Dual Series-Cascaded Ring Resonators with Multiple Transmission Zeros

High-selectivity single-ended and balanced bandpass filters using ring resonators and coupled lines loaded with multiple stubs

Dual-Band Bandpass Filter Based on Slow-Wave Resonant Cell with Dual-Resonance

Miniaturized Mixed-Cross Coupling Bandpass Filter with Source–load Coupling

A Dual-Band Bandpass Filter Using a Single Dual-Mode Ring Resonator