Abstract:The article proposes three lumped-distributed resonators, each of which introduces two transmission zeros (TZ) at real frequencies into the transfer function of inline bandpass filter (BPF). The use of such resonators in mixed-coupled BPFs without cross-coupling increases the number of TZs from ( $N + 1$ ) to (3 $N + 1$ ). It improves the filter performance. Lumped-distributed resonators represent a stepped-impedance or uniform transmission line segment to which one capacitance or inductance is connected in cascade. These resonators have two antiresonant frequencies $\omega _{p1}$ , $\omega _{p2}$ , which are placed next to the main resonant frequency $\omega _{0}$ , which leads to two TZs. Antiresonant frequencies $\omega _{p1}$ , $\omega _{p2}$ are the poles of the input admittance $Y(j\omega )$ , their position is controlled by the parameters of the resonators. Lumped-distributed resonators can form equidistant TZ pairs, including those of higher degree, allowing the implementation of BPFs with quasielliptic frequency responses and improved selectivity. It has been established that reducing Q-factors of inductor $Q_{L}$ and capacitor $Q_{C}$ do not increase the insertion loss in the passband of BPF. A design method for BPF with mixed couplings between adjacent resonators is established. It is also suitable for filters that use the proposed resonators. As result, the TZ number of such BPFs is increased from ( $N$ $+$ 1) to (3 $N + 1$ ).

Bandpass Filter Using Dual Series-Cascaded Ring Resonators with Multiple Transmission Zeros

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Dual-Band Bandpass Filter with Multiple Controllable Transmission Zeroes and Wide Stopband

Bandpass Filter Using Three Pairs of Coupled Lines with Multiple Transmission Zeros

Fourth-Order Bandpass Filter Using Dual-Mode Ring Resonator and Parallel-Coupled Lines

Super High-Selectivity Fifth-Order Bandpass Filter with Twelve Transmission Zeros

High-Selectivity Wideband Bandpass Filter Using Simple Coupled Lines with Multiple Transmission Poles and Zeros

Compact Bandpass Filter Using Two Ring Resonators And Two Open Stubs

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

High-selectivity Bandpass Filter Using Six Pairs of Quarter-Wavelength Coupled Lines

Miniaturized Dual-Band Bandpass Filter with Multiple Transmission Zeros

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Compact Microstrip Dual-Band Bandpass Filter with Multiple Transmission Zeros

Individually Controllable Dual-Band Bandpass Filter with Multiple Transmission Zeros and Wide Stopband

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Compact Quad-Band Bandpass Filter Based on Sextuple-Mode Stepped Impedance Stub-Loaded Resonator

Dual‐band Bandpass Filter Using Two Simple Coupled Microstrip Rings

Novel compact band-pass filter with three transmission zeros

Lumped-Distributed Resonators Providing Multiple Transmission Zeros in Bandpass Filters With Simple and Mixed Couplings

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Bandpass Filters with N + 1 Transmission Zeros Using Λ/4 Resonator and Λ/2 Resonator