Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Transmission Zero Controllable Bandpass Filters with Dual and Quad-Band

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Coplanar Waveguide Bandpass Filters with Separated Electric and Magnetic Couplings

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact Microstrip Balanced Bandpass Filter with Adjustable Transmission Zeros

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Miniaturized independent controllable dual-band bandpass filter by using transversal signal interference concepts

SECOND-ORDER MIXED COUPLING FILTER WITH ONE CONTROLLABLE TRANSMISSION ZERO USING MULTILAYER SUBSTRATE INTEGRATED WAVEGUIDE

Dual-band bandpass filter using centrally coupled resonators (CCRs)

Compact Superconducting Single- and Dual-Band Filter Design Using Multimode Stepped-Impedance Resonator

Compact Quad-Band Bandpass Filter Using Quad-Mode Stepped Impedance Resonator and Multiple Coupling Circuits

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

A Compact Size Coupling Controllable Filter with Separate Electric and Magnetic Coupling Paths