Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The conventional contour method (CM) needs multiple cuts at different locations to obtain the multiple components of residual stress in a specimen. To improve the convectional CM, an extended CM was proposed in the present study to determine the multiple stress components in a thick butt-welded joint without cutting at different locations. First, the longitudinal residual stress in the specimen was measured with the CM, then a thin slice was cut from the after-cut specimen, and the remaining transverse stress in the slice was measured with the X-ray diffraction method and the released transverse stress of the slice was constructed by the finite element analysis (FEA), and finally, the transverse stress on the same cross-section was obtained by the superposition of the remaining and the released transverse stresses on the slice. A two-cut CM was also carried out to get the transverse stress along the weld line center. The stress distribution characteristics of the specimen and the release extent of the transverse stress in the slice were discussed. The results show that the extended CM can evaluate the original biaxial residual stresses on a cross-section without multiple cuts at different locations. The transverse stress distribution trend obtained by the extended CM is close to that from the two-cut CM. Without considering the compressive stress induced by ultrasonic impact treatment, the longitudinal stress in the weld region is tensile with a maximum value of 550 MPa and the transverse stress at the weld line center is self-equilibrating with a maximum value reaching 552 MPa. Two peaks of tensile longitudinal and transverse stress appear at a certain distance beneath the top and bottom surfaces. When cutting a thin slice with a thickness of 5 mm along the transverse direction from the after-cut specimen, over 82% of the original tensile transverse stresses are retained in the slice.

Noise-insensitive Contour Method for Residual Stress Measurement in Laser Butt Welding

Finite-element inverse analysis of residual stress for laser welding based on a contour method

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Surface Fitting and Finite Element Inverse Analysis of Residual Stress in a Weldment by the Contour Method

Research on Welding Residual Stress Measurement Using Electromagnetic Acoustic Transducer

Study on Joint Residual Stress Induced by Laser Beam Welding of High Strength Automobile Thin Sheet

Finite element simulation of welding process and real-time monitoring assessment

Numerical Investigations on Residual Stress in Laser Penetration Welding Process of Ultrafine-Grained Steel

Mitigation of Tensile Residual Stress Induced During Welding with Laser Shock Processing

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Measurement and Simulation of Residual Stresses in Laser Welded CFRP/steel Lap Joints

Evaluation of multiple residual stress components in a thick welded joint using extended contour method

An Inverse Approach for Constructing the Residual Stress Field Induced by Welding

AL7N01 butt joint welding residual stress measurement by ultrasonic method

Evaluating Stress Intensity Factors Due to Weld Residual Stresses by the Weight Function and Finite Element Methods

Numerical Analysis of Low-Cycle Fatigue Using the Direct Cyclic Method Considering Laser Welding Residual Stress

Residual stress determination in friction stir butt welded joints using a digital image correlation-aided slitting technique

Ultrasonic Monitoring of Residual Stress Reduction Methods

Determination of Residual Stress in Hybrid Laser-Arc Welded U-rib-to-deck Joints by Thermo-Metallurgical-mechanical Simulation and Neutron Diffraction

Nondestructive Measurement System for Welding Residual Stress by Ultrasonic Method