Abstract:A series of ultra-clean, unsupported Cu-doped and Pd-doped Ni model catalysts was investigated to develop the fundamental concept of metal doping impact on the carbon tolerance and catalytic activity in the dry reforming of methane (DRM). Wet etching with concentrated HNO3 and a subsequent single sputter–anneal cycle resulted in the full removal of an already existing oxidic passivation layer and segregated and/or ambient-deposited surface and bulk impurities to yield ultra-clean Ni substrates. Carbon solubility, support effects, segregation processes, cyclic operation temperatures, and electronic and ensemble effects were all found to play a crucial role in the catalytic activity and stability of these systems, as verified by X-ray photoelectron spectroscopy (XPS) surface and bulk characterization. Minor Cu promotion showed the almost complete suppression of coking with a moderate reduction in catalytic activity, while high Cu loadings facilitated carbon growth alongside severe catalytic deactivation. The improved carbon resistance stems from an increased CH4 dissociation barrier, decreased carbon solubility in the bulk, good prevailing CO2 activation properties and enhanced CO desorption. Cyclic DRM operation on surfaces with Cu content that is too high leads to impaired carbon oxidation kinetics by CO2 and causes irreversible carbon deposition. Thus, an optimal and stable NiCu composition was found in the region of 70–90 atomic % Ni, which allows an appropriate high syngas production rate to be retained alongside a total coking suppression during DRM. In contrast, the more Cu-rich NiCu systems showed a limited stability under reaction conditions, leading to undesired surface and bulk segregation processes of Cu. The much higher carbon deposition rate and solubility of unsupported NiPd and Pd model catalysts results in severe carbon deposition and catalytic deactivation. To achieve enhanced carbon conversion and de-coking, an active metal oxide boundary is required, allowing for the increased clean-off of re-segregated carbon via the inverse Boudouard reaction. The carbon bulk diffusion on the investigated systems depends strongly on the composition and decreases in the following order: Pd > NiPd > Ni > NiCu > Cu.

Unraveling Enhanced Activity, Selectivity, and Coke Resistance of Pt-Ni Bimetallic Clusters in Dry Reforming

Nickel‐Catalyzed Dry Reforming of Methane Via Modulating the Zirconia Shapes

Dry Reforming of Ethane and Butane with CO2 over PtNi/CeO2 Bimetallic Catalysts

Effect of Ni on the catalytic performance of Pt/γ-Al2 O3 in methylcyclohexane dehydrogenation

Enhanced CH 4 Selectivity in CO 2 Hydrogenation on Bimetallic Pt–Ni Catalysts with Pt Nanoparticles Modified by Isolated Ni Atoms

Deciphering the Stability Mechanism of Pt-Ni/Al2O3 Catalysts in Syngas Production Via DRM

Synergetic Effect of Surface and Subsurface Ni Species at Pt-Ni Bimetallic Catalysts for Co Oxidation

Dry reforming of methane for syngas production over noble metals modified M-Ni@S-1 catalysts (M = Pt, Pd, Ru, Au)

Restructured PtNi on Ultrathin Nickel Hydroxide for Enhanced Performance in Hydrogen Evolution and Methanol Oxidation

New Mechanism Insights into Methane Steam Reforming on Pt/Ni from DFT and Experimental Kinetic Study

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Improving Anti-Coking Properties of Ni/Al2O3 Catalysts via Synergistic Effect of Metallic Nickel and Nickel Phosphides in Dry Methane Reforming

A Single Source Method to Generate Ru-Ni-MgO Catalysts for Methane Dry Reforming and the Kinetic Effect of Ru on Carbon Deposition and Gasification

Structural Changes of Ni and Ni-Pt Methane Steam Reforming Catalysts During Activation, Reaction, and Deactivation Under Dynamic Reaction Conditions

Tuning Pt-skin to Ni-rich Surface of Pt3Ni Catalysts Supported on Porous Carbon for Enhanced Oxygen Reduction Reaction and Formic Electro-Oxidation

PtM (M = Fe, Co, Ni) Bimetallic Nanoclusters as Active, Methanol-Tolerant, and Stable Catalysts toward the Oxygen Reduction Reaction

Highly Stable Ni−B/Honeycomb−Structural Al2O3 Catalysts for Dry Reforming of Methane

Enhanced Thermocatalytic Stability by Coupling Nickel Step Sites with Nitrogen Heteroatoms for Dry Reforming of Methane

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Stable Trimetallic NiFeCu Catalysts with High Carbon Resistance for Dry Reforming of Methane

Dry Reforming of Methane on NiCu and NiPd Model Systems: Optimization of Carbon Chemistry