Abstract:Organic field-effect transistors (OFETs) based on organic semiconductor material 2,7-dioctyl[1] benzothieno[ 3,2-b] benzothiophene (C8BTBT) as the active layer were fabricated by using organic molecular beam deposition (OMBD) and solution-processed methods, in which the C8BTBT thin-film morphology could be well controlled. In OMBD method, C8BTBT thin-film morphology could be controlled by the thickness of organic semiconductor layer and the deposition rate, of which the high-quality C8BTBT thin film was obtained at a thickness of about 20 nm and at a deposition rate of 1.2 nm/min, resulting in an obvious mobility improvement from 2.8 x 10(-3) cm(2) V-1 s(-1) to 1.20 cm(2) V-1 s(-1). While in the solution-processing, C8BTBT thin-film morphology and thickness are related to the spin-coating speed and the substrate position in spin coater, i.e., in-centre and off-centre position. The off-centre spin-coating with an optimized speed produced large-size domain C8BTBT thin film and accordingly resulted in a mobility of 1.47 cm(2) V-1 s(-1). Furthermore, an additive polystyrene (PS) was added into C8BTBT solution could further improve the thin-film morphology with more metal-stable phase as well as improve the interface contact with the substrate SiO2, resulting in the highest mobility up to 3.56 cm(2) V-1 s(-1). The research suggested that C8BTBT-based OFETs with the mobility over 1.20 cm(2) V-1 s(-1) could be fabricated by using both OMBD and solution-processed methods through the thin-film morphology and structure optimization, which shows the potential applications in high-performance flexible and printed electronics. (C) 2016 Elsevier B.V. All rights reserved.

Influence of Low Temperature Annealed Ultrathin CYTOP Buffer Layer on the Performance of Single Crystal Organic Field-Effect Transistors

Improving the Performance of Aligned Carbon Nanotube-Based Transistors by Refreshing the Substrate Surface.

Low-Voltage, High Performance Flexible Organic Field Effect Transistors Based on Ultrathin Single Crystal Microribbons.

Improving the Performance of the Organic Thin-Film Transistors with Thin Insulating Lithium Fluoride Buffer Layer

Enhanced performance of field-effect transistors based on C 60 single crystals with conjugated polyelectrolyte

Performance Enhancement of Organic Thin-Film Transistors with Improved Copper Phthalocyanine Crystallization by Inserting Ultrathin Pentacene Buffer

Enhanced Charge Carrier Injection in Heterojunction Organic Field-Effect Transistor by Inserting an MoO 3 Buffer Layer

Effect of MoO_3 Buffer Layer on the Performance of Organic Thin Film Transistor

Liquid Crystal-Like Active Layer for High-Performance Organic Field-Effect Transistors

High-Performance and Operationally Stable Organic Thin-Film Transistors Using Bi-Buffer Layers with Low-Cost Electrodes

Ultrahigh Mobility and Efficient Charge Injection in Monolayer Organic Thin-Film Transistors on Boron Nitride.

Performance enhancement of p-type organic field-effect transistor through introducing organic buffer layers

Enhancing The Uniformity of Organic Field‐Effect Transistors by a Single‐Crystalline Layer‐Controlled Active Channel

Enhanced Performance of Organic Field‐Effect Transistor Memory by Hole‐Barrier Modulation with an N‐Type Organic Buffer Layer between Pentacene and Polymer Electret

High-Performance Ultra-Low-Power OFET Based on Anodized TiOx Dielectric and Solution-sheared Organic Single Crystal

Interfacial Flat-Lying Molecular Monolayers for Performance Enhancement in Organic Field-Effect Transistors

High Performance Organic Field-Effect Transistor with Oxide/Metal Bilayer Electrodes

High performance n-channel thin-film field-effect transistors based on angular-shaped naphthalene tetracarboxylic diimides

Controllable Thin-Film Morphology and Structure for 2,7-Dioctyl[1]benzothieno[3,2-b][1]benzothiophene (c8btbt) Based Organic Field-Effect Transistors

Solution-processed n-type fullerene field-effect transistors prepared using CVD-grown graphene electrodes: improving performance with thermal annealing

Performance Improvement of Pentacene Organic Thin Film Transistor by Inserting 1,1'-Bis(di-4-tolylaminophenyl) Cyclohexane Hole Transport Buffer Layer