Abstract:As a critical factor affecting compressor performance, the influence of a rotor-stator axial clearance on rotating stall characteristics remains unclear. In the process of understanding the compressor stall mechanism, the relationship between the rotor stall characteristics of a 1.5-stage compressor and the downstream stator is studied. In this paper, numerical simulation is mainly utilized to study the change in flow field behavior and rotor performance during the stall process under the enlargement of axial clearance between rotor and downstream stator. The experimental signals and compressor characteristics are used to verify the numerical results. The numerical results show that the spanwise distribution of flow capacity changes while the stall margin decreases with the enlargement of axial clearance, and the disturbances intensity during the stall process is different. Firstly, the pressure signals during the stall process are analyzed. The frequency band of rotating instability decreases from 0.55BPF to 0.44BPF and the intensity decreases by 50% under the large clearance, and the stall inception appears in advance with a opposite change in the circumferential propagation velocity. Then, the variations of throughflow characteristics, rotor-stator interference and tip leakage flow in different phases are investigated. It is found that the increase of axial clearance leads to flow field blockage aggravates at the tip and weakens at the root. For the high intensity wakes at the tip region, the vortex scale increases more in the larger axial clearance, enhancing the negative effect of velocity deficit on stator separation. The axial momentum ratio is used to quantitatively describe the instability degree of tip leakage flow. The severer flow blockage at the tip region leads to higher tip leakage flow axial momentum ratio and the advanced onset of stall. Finally, further investigation of the stall cell flow mechanism shows that the tornado vortex structure formed by the interaction between lateral vortex and tip secondary vortex can be regarded as the flow criterion of spike stall, which is generated in both models.

Some Effects of Non-Axisymmetric Tip Clearance Layout on Axial Compressor Aerodynamics

Performance Impact of Uncertain Variations of Inlet Flow for Axial Compressor Blades

Vortex structure control based bleed in axial compressor cascade with tip clearance using large eddy simulation

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Effects of Circumferentially Non-Uniform Clearance on the Spanwise Flow Characteristics in a Transonic Compressor Rotor

Numerical investigation of tip clearance effects on rotating instability of a low-speed compressor

AERODYNAMIC ANALYSIS OF A 7-STAGE AXIAL COMPRESSOR WITH VARIOUS TIP CLEARANCES IN ROTOR

Effect of Nonuniform Tip Clearance on the Performance of Transonic Axial Compressors

Effect of Tip Clearance on Compressor Performance

The Impact of Second-Harmonic Tip Clearance Distributions Caused by Casing Ovalization and Blade Height Variation in a Large-Scale Compressor Stage

Numerical Research On Effects Of Shroud Contraction On Tip Leakage Flow And Overall Performance Of Axial Compressors

Influence of Rotor-Stator Axial Clearance on Compressor Rotating Stall Characteristics

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor

Effects of tip clearance on flow field and performance of a centrifugal compressor

Numerical investigation on short length-scale disturbance generation in an eccentric axial compressor rotor at a stable condition

Influence of the Tip and Axial Clearances on the Aerodynamic Performance of a Helium Compressor

Influence of Blade Tip Surface Roughness on the Performance of a Single-Stage Axial Flow Compressor

Effect of inlet radial distortion on aerodynamic stability in a multi-stage axial flow compressor

Effect of Tip Clearance on the Aeroelastic Stability of a Wide-Chord Fan Rotor

Numerical Investigation on Flow Field Distribution of Eccentric Compressors Based on Steady and Unsteady CFD Methods