Abstract:Rotating stall is a primary limit to compressor performance, and the reasonable estimation of stall-onset point is very useful in compressor design. Extensive investigations have been conducted in the past few decades to develop analytical models and numerical methods for stall-onset prediction, and much progress has been made in the understanding of flow mechanism for rotating stall. In spite of the robust prediction ability of stall-onset condition, the unsteady 3-D computations are still time-consuming for industrial applications. Analytical models are able to provide a fast estimation of compressor stall onset. However, empirical correlations are usually needed in the analytical models, which leads to a decrement in the accuracy and application scope of the models. Especially for high speed compressors, tip clearance effects hasn't been evaluated reasonably in the previous analytical models, which actually plays a very important role in determining the stall-onset point. Therefore, new analytical models accounting for tip clearance effects will be promising in estimating the stall-onset more precisely. It's the requirement for a new analytical model that motivates the present work.In the present work, the unsteady flow simulation of a transonic compressor rotor at near stall condition was performed to clarify the relations between tip clearance flow oscillations and compressor stall-onset in transonic axial compressor rotors. The interaction between tip clearance and incoming flow is simplified to a 2-D analogy of free-stream and counter-flow wall jet interaction. Momentum balance analysis is applied to identify the position of tip clearance/incoming flow interface, together with a prediction method of tip leakage vortex core trajectory. The effects of the in-passage shock on tip clearance/incoming flow interaction is taken into account by applying an upstream deflection of the interface, and this deflection is also observed in the computational flow field at near stall conditions. As a combination of the above-mentioned aspects, a model is proposed to define the critical point for tip clearance flow spillage from blade leading edge, which corresponds to the stall-onset point on compressor performance curves. Validations against numerical results prove that the model is capable of including tip clearance effects on stall-onset point. Parametric study of the model shows that blade tip offloads with increasing tip clearance, reducing the inverse momentum flux of tip clearance flow. As a result, the stalling flow coefficient appears to be less sensitive to tip clearance variation, which accords with the published experimental results.

Influence of Rotor-Stator Axial Clearance on Compressor Rotating Stall Characteristics

Modeling For Tip Clearance Effects On Stall-Onset Condition In Transonic Axial Compressors

Influence of Tip Clearance on Flow Characteristics of Axial Compressor

The role of radial secondary flow in the process of rotating stall for a 1.5-stage axial compressor

Research on Stall Mechanism Based on Vorticity Dynamics in a Single-Rotor Axial Compressor

The Investigation of Axial Compressor With Aggressive Flow Path Near Stall Condition

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor

The Unsteadiness of Tip Clearance Flow and Its Effect to Stability of Transonic Axial Compressor

Some Effects of Non-Axisymmetric Tip Clearance Layout on Axial Compressor Aerodynamics

Effect of Tip Clearance Size on the Performance of a Low-Reaction Transonic Axial Compressor Rotor

Effect of tip clearance dimension on unsteadiness in a low-reaction aspirated transonic compressor rotor

Effect of Tip Clearance on Rotating Stall in a Mixed-Flow Pump

Unsteady near-stall flow mechanisms in a transonic compressor rotor at different rotating speeds

Effects of Circumferentially Non-Uniform Clearance on the Spanwise Flow Characteristics in a Transonic Compressor Rotor

Evolution of the Flow Instabilities in an Axial Compressor Rotor with Large Tip Clearance: an Experimental and URANS Study

Effects of Nonaxisymmetric Volute on Rotating Stall in the Vaneless Diffuser of Centrifugal Compressors

Influence Mechanism of Ambient Air Parameters on the Rotational Stall of an Axial Fan

Analysis on Spike-Type Rotating Stall in Transonic Axial Compressor by Dynamic Mode Decomposition

A Study of Influences of Inlet Total Pressure Distortions on Clearance Flow in an Axial Compressor

Effects of rotating inlet distortion on the stall mechanism of an axial flow compressor

The Influence of Rotor-Stator Spacing on the Loss in One-Stage Transonic Compressor