Abstract:Due to the lengthy certification process for newly designed turbine blades, product upgrading of industrial gas turbine units is often performed solely on compressor and combustor. Since their inlet conditions are significantly changed, the entire four-stage turbine operates far away from its original design point, leading to decreased efficiency, and increased flutter risk. This investigation first performs numerical simulations to study the flow field change of the last-stage turbine in a gas turbine before and after product upgrading. To reduce the load of the last-stage turbine without reducing the power output of the whole turbine, the enthalpy drops of turbine are reallocated to the front three stages. After modifying the blade profile based on S1 stream surface analysis, a CFD simulation is carried out on the modified three-dimensional blade passage. It is shown that the modified blade design greatly reduces the Mach number at the tip outlet of the last-stage blade, thus possibly reducing flutter risk and improving the aerodynamic efficiency of the turbine. This paper also attempts to redesign the blade geometry by different radial blade stacking of both forward sweep and backward sweep. It is found that the backward-swept blade modification can effectively reduce the endwall flow loss. This work presents the improvements of the aerodynamic efficiency of last-stage through a series of improvement methods and provides a reference for future detailed optimization of this last-stage turbine.

Aerodynamic Performance Analysis Of Three Stages Turbine And Four Stages Turbine Of F Class Heavy Duty Gas Turbine

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Aerodynamic Optimization Design and Analysis on the Turbine Part of F Class Gas Turbine under Middle and Low Heat Value Fuel

Impact of Aerodynamic Performance by the Heat Value of Fuel Change on the Turbine Cascade of Ground Heavy Duty Gas Turbine

3D Numerical Investigation on the Aerodynamic Performance of an Air Cooled 4-Stage Turbine

Heavy-duty gas turbine 3D blade modelling and flow field analysis

The Design and Performance Analysis of a Highly-Loaded Turbine

Comparative Assessment of Aerodynamic Losses in Turbine Stages with Supercritical Carbon Dioxide and Steam

Experimental And Numerical Investigations On The Aerodynamic Performance Of The Three-Stage Turbine With Consideration Of The Leakage Flow Effect

Effect Of Stage Axial Distances On The Aerodynamic Performance Of Three-Stage Axial Turbine Using Experimental Measurements And Numerical Simulations

Numerical Study on the Aerodynamic Performance of Three-stage Turbine Inner Flow Field with Cooling Air Mixing

Analysis of Off-Design Characteristics of Multistage Turbines

Analysis of the Flow Inside the Variable Geometrical Power Turbine Stator/rotor Cascade and Exhaust Gas Duct of a MW Class Gas Turbine

Quasi-3D Numerical Simulation of Flow Path Characteristics of Heavy-load Gas Turbine

Numerical Study On Three Dimensional Unsteady Flow Of A High Pressure Gas Turbine Stage

An Aerodynamic Investigation of the Last-Stage Turbine in an Upgraded Gas Turbine

Aerodynamic Analysis of a Highly Loaded 5-Stage Axial Compressor

Numerical Investigation on Effects of Leakage Flow on the Aerodynamic Performance of Turbine Stages

Investigations On The Flow Pattern And Aerodynamic Performance Of Last Stage And Exhaust Hood For Large Power Steam Turbines

Numerical Investigations on the Aerodynamic Performance of Turbine Stage with Nonaxisymmetric End Wall Profiling

Numerical Study Of Internal Flow Fields In Steam Turbine Stages With Balance Holes