Abstract:The turbine aero-thermal design expertise has not reached the ultimate level in comparison to compressor expertise which has evolved to high loading, high pressure ratio design with a limited number of stages. For high pressure turbine section, single highly loaded stages are typically representative of wide class of advanced aero engines. The transonic turbines significantly operate at higher pressure ratios with less number of stages but at an expense of relatively lower efficiencies. In this study, steady three-dimensional numerical analysis of flow through a highly loaded transonic turbine stage is conducted using commercial software NUMECA which solves Reynolds-Averaged Navier-Stokes equations (RANS) using finite volume method. Due to high pressure ratio, the flow is highly transonic in nature; the gas flow becomes supersonic as it exits the nozzle guide vanes although the downstream velocities become subsonic. One-equation Spalart-Allmaras model (SA) and two-equation Shear Stress Transport k-w model (SST), are employed in the simulations. The one-equation SA model runs faster and gives good results in many turbo machinery applications and it is normally recommended by many researchers. The two-equation SST model combines the best of k-omega and k-epsilon models by a blending-function to switch between both models. The numerical results of both the SA and SST models are validated with the pneumatic flow field measurement between the stator-rotor gap and downstream of the rotor in axial planes. The tip clearance of the rotor blade and its effects are considered by modeling the tip gap. The partial shroud gap at aft section of stator is also modeled for validation of results with the experiments. The interaction of tip leakage vortex with the main flow is analyzed. The impact of leakage flow is investigated by applying the same boundary conditions but varying the tip clearance. An efficiency loss of 3.08% has been observed due to the tip clearance flow by varying the tip clearance from 0 to 0.95 mm which depicts the importance of study of losses associated with tip leakage flows.

Numerical Investigation on Effects of Leakage Flow on the Aerodynamic Performance of Turbine Stages

Experimental And Numerical Investigations On The Aerodynamic Performance Of The Three-Stage Turbine With Consideration Of The Leakage Flow Effect

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

The Effect Of The Shrouded Rotor Blade Tip Leakage Flow On The Aerodynamic Performance Of A One And Half Turbine Stage

EFFECTS OF THE TIP LEAKAGE FLOWS OF THE SHROUDED ROTOR BLADE ON THE AERODYNAMIC PERFORMANCE OF THE TURBINE STAGE

Numerical Investigation on the Effect of Tip Clearance on a Turbine Stage Flow-field and Aerodynamic Performance

Numerical Simulation of the Aerodynamic Characteristics of Blade Tip Leakage Flow in Steam Turbines

Study on Unsteady Aerodynamic Performance of Turbine Stage Considering Tip Leakage Flow

Effects of Leakage Vortex on Aerodynamic Performance and Loss Mechanism of Steam Turbine

Comparative investigation of tip leakage flow and its effect on stage performance in shrouded and unshrouded turbines

Effects Of Tip Clearance On Unsteady Flow Characteristics In An Axial Turbine Stage

Numerical Study Of Internal Flow Fields In Steam Turbine Stages With Balance Holes

Numerical Investigation of the Interaction Between Mainstream and Tip Shroud Leakage Flow in a 2-Stage Low Pressure Turbine

Numerical Investigation on the Unsteady Flowfield of the Turbine Stage under Different Axial Gaps

Numerical Study on Three-Dimensional Flow in Control Stage of Steam Turbine under Multiple Working Conditions Considering Leakage Flows in Seals

Computational Study of the Effects of Shroud Geometric Variation on Turbine Performance in a 1.5-Stage High-Loaded Turbine

Research of Turbine Stage Efficiency Influenced by the Balance Hole Leakage

Fluid Dynamic Efficiency Optimization of Steam Turbine Stages Considering Leakage Influences and Inter-stage Reciprocal Interferences

Aerodynamic Impact of Hub and Shroud Leakage Flow on an Axial Turbine Stage

Numerical Investigation of Secondary Flows Through Highly Loaded Transonic Turbine Stage

Numerical Simulation for Effects of Reynolds Numbers on Tip Leakage Flows in Turbine