Abstract:Various polyamide1010/polypropylene (PA1010/PP) blends were prepared by melt mixing using maleic anhydride-grafted ethylene-octene copolymer (POE-g-MAH) or ethylene-butyl acrylate-glycidyl methacrylate terpolymer (PTW) as compatibilizers. The compatibilizing effects of POE-g-MAH and PTW on PA1010/PP blends obtained via dynamic packing injection molding(DPIM) were investigated by means of scaning electron microscopy (SEM), mechanical testing and differential scaning calorimetry (DSC), respectively. It was found the static specimens compatibilized with PTW had smaller domain size in the same condition,two crystallization peaks of PP appeared in DSC cooling curves, the crystallization at the lower temperature should be assigned to homogeneous nucleation, and the other one was heterogeneous nucleation. The static specimens compatibilized with PTW had better tensile and impact properties than the ones compatibilized with POE-g-MAH, indicating a better compatibilization effect of PTW on PA1010/PP. The tensile strength,tensile modulus and notched impact strength of all blends were found 10 increase largely by means of shearing. The dynamic specimens compatibilized with POE-g-MAH and PTW had almost the same impact strength. But the dynamic molded specimens compatibilized with POE-g-MAH had a remakably decrease of domain size and more uniform dispersion. Thus their impact strength increased more than that of PTW,which indicated that shear stress was more beneficial to the interactions occuring between POE-g-MAH and PA1010/PP. The differences of compatibilization effect between POE-g-MAH and PTW lay in the differences of morphology of materials caused by their chemical compositions.

Preparation and Characterization of Polyoxymethlene/Thermoplastic Polyamide Elastomer Blends Compatibilized by Maleic Anhydride Grafted ABS Copolymer

Reactive Compatibilization of Multi-Hydroxy Functional Compound Based on Polyoxymethylene/Thermoplastic Polyether Elastomer Blends

Characterization and Properties of Thermoplastic Polyether Elastomer/Polyoxymethylene Blends Prepared by Melt-Mixing Method

Preparation and Characterization of Nitrile Butadiene Rubber (NBR)/Polyoxymethlene (POM) Blends Compatibilized by Maleic Anhydride Grafted POM (MAH-g-POM)

Preparation of Amine-Functionalized Compatilizer for PC/ABS Blends

Reactive Compatibilization of Polyamide 6/Olefin Block Copolymer Blends: Phase Morphology, Rheological Behavior, Thermal Behavior, and Mechanical Properties

Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin

Preparation, structure and properties of dynamically vulcanized polypropylene/acrylonitrile butadiene rubber/zinc dimethacrylate ternary blend composites containing maleic anhydride grafted polypropylene

Study on the Microstructures and Mechanical Behaviour of Compatibilized Polypropylene/Polyamide-6 Blends

Creating Super-Tough and Strong PA6/ABS Blends Using Multi-Phase Compatibilizers

Compatibilization And Toughening Of Immiscible Ternary Blends Of Polyamide 6, Polypropylene (Or A Propylene-Ethylene Copolymer), And Polystyrene

Super Tough PA6/PP/ABS/SEBS Blends Compatibilized by a Combination of Multi-Phase Compatibilizers

Pan-Milling Preparation of Polypropylene- graft -Maleic Anhydride and Its Compatibilizing Effect on Polyamide 6/Polypropylene Blend

Polyamide Reinforced Epdm Compatibilized with Maleic Anhydride Grafted Ethylene-Propylene-Diene Rubber

MORPHOLOGY AND MECHANICAL PROPERTIES OF NYLON-6/ABS POLYMER BLENDS COMPATIBILIZED BY STYRENE-MALEIC ANHYDIDE COPOLYMER

Study on structure and properties of polyamide 6/polypropylene blends

Polyamide 6/maleated ethylene-propylene-diene rubber/organoclay composites with or without glycidyl methacrylate as a compatibilizer

Influence of Epoxy Resin on the Morphological and Rheological Properties of PBT/ABS Blends Compatibilized by ASMA

Polyamide-6/Poly(lactic Acid) Blends Compatibilized by the Maleic Anhydride Grafted Polyethylene-Octene Elastomer

Reactive Compatibilization and Elastomer Toughening of Poly(2,6-dimethyl-1,4-phenylene Oxide)/polyamide 6 Blends

COMPARATIVE STUDY ON COMPATIBILIZATION EFFECT OF MALEIC ANHYDRIDE-GRAFTED ETHYLENE-OCTENE COPOLYMER AND ETHYLENE-BUTYL ACRYLATE-GLYCIDYL METHACRYLATE TERPOLYMER ON PA1010/PP BLENDS OBTAINED VIA DYNAMIC PACKING INJECTION MOLDING