Abstract:Polyamide/polypropylene (PA1010/PP) blends were prepared by melt mixing using maleic anhydride-grafted ethylene-octene copolymer (POE-g-PMAH) as a reactive compatibilizer. The compatibilizing effects of POE-g-PMAH on PA1010/PP blends were investigated by means of scaning electron microscopy (SEM), mechanical testing, Fourier transform infrared spectroscopy (FTIR) and differential scaning calorimetry (DSC), respectively. It was found that the addition of POE-g-PMAH could decrease the size of the dispersed PP particles, when the mass ratio of PA1010/PP/P0E-g-PMAH = 70/30/15, the domains showed a fine and uniform dispersion in the matrix. FTIR results showed that the anhydride carbonyl groups of POE-g-PMAH reacted with the end groups of PA1010 in the blending process. DSC results showed that addition of POE-g-PMAH decreased the crystallization temperature and crystallinity of PA1010 and PP in the blends, indicating that POE-g-PMAH had an inhibition effect on the crystallization of PA1010 and PP. Mechanical testing indicated that with increasing the POE-g-PMAH content, the Izod impact strength of dried samples increased gradually, when the content of POE-g-PMAH was 15%, the Izod impact strength of dried samples was 21. 13 kJ/m2, which is 3. 1 times that for the binary PA1010/PP blend. Meanwhile, the flexural strength, tensile strength and modulus can be maintained at a relatively high level. The compatibilization mechanism of POE-g-PMAH lied in the chemical interactions occuring between the terminal amino groups of PA1010 and anhydride of MAH in POE-g-PMAH during the melt mixing, and the compatibility between PP and ethylene-octene of POE in POE-g-PMAH. Hense the addition of POE-g-PMAH decreased the interfacial tension and the domain size dramatically, improved the mechanical properties greatly.

Pan-Milling Preparation of Polypropylene- graft -Maleic Anhydride and Its Compatibilizing Effect on Polyamide 6/Polypropylene Blend

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Compatibilization Effect of PP-g-(MAH/VAc) on Polypropylene/Polyamide 6 Blends

Morphology and properties of PP/PA 6 blends modified by reactive compatibilization

Study on structure and properties of polyamide 6/polypropylene blends

Effect of Maleic‐anhydride‐grafted Polypropylene As a Compatibilizer on the Properties of Polypropylene/(modified Carbon Black) Composites

Compatibilization of polypropylene/nylon 6 blends with a polypropylene solid-phase graft

Compatibilizing Effect of Maleated Polypropylene on the Mechanical Properties of Injection Molded Polypropylene/polyamide 6/Functionalized-Tio2 Nanocomposites

Study on the Microstructures and Mechanical Behaviour of Compatibilized Polypropylene/Polyamide-6 Blends

Effects of Polypropylene-G-dibutyl Maleate on Mechanical and Rheological Properties of PP/PA6 Blends

Properties of PA1010/PP blends modified by reactive compatibilization with POE-g-PMAH

COMPARATIVE STUDY ON COMPATIBILIZATION EFFECT OF MALEIC ANHYDRIDE-GRAFTED ETHYLENE-OCTENE COPOLYMER AND ETHYLENE-BUTYL ACRYLATE-GLYCIDYL METHACRYLATE TERPOLYMER ON PA1010/PP BLENDS OBTAINED VIA DYNAMIC PACKING INJECTION MOLDING

MORPHOLOGY AND MECHANICAL PROPERTIES OF TPU/PP BLENDS BY ADDITION OF PP-g-MA

Morphology, Thermal Behavior, and Mechanical Properties of Pa6/Uhmwpe Blends with Hdpe-G-Mah As A Compatibilizing Agent

Preparation, structure and properties of dynamically vulcanized polypropylene/acrylonitrile butadiene rubber/zinc dimethacrylate ternary blend composites containing maleic anhydride grafted polypropylene

Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin

A New Method for Preparing Anhydride Grafted Polypropylene with High Grafting Ratio by Combining Microwave Reaction and Reactive Extrusion

Compatibilization of Polypropylene/recycled Polyethylene Terephthalate Blends with Maleic Anhydride Grafted Polypropylene in the Presence of Diallyl Phthalate

Studies on PA6–PP–wollastonite Composite Compatibilised by PP–graft–maleic Anhydride Prepared Via Pan Milling

Polyamide-6/Poly(lactic Acid) Blends Compatibilized by the Maleic Anhydride Grafted Polyethylene-Octene Elastomer

Functionalization of Polypropylene and Compatibilization of Polypropylene/Nylon 6 Blends with Copolymers Containing Alpha-Methyl Styrene Units