Abstract:Morphologies and viscoelastic behavior of high density polyethylene/nylon 6 (HDPG/PA6) blends compatibilized by maleic anhydride grafted high density polyethylene (HDPE-g-MAH) were studied through observation of scanning electron microscope(SEM) and dynamic rheological testing. It is found that HDPE-g-MAH can efficiently enhance the compatibility between PA6 and HDPE and improve the dispersion of PA6 and the interfacial state of phases due to in situ forming of graft copolymer (HDPE-g-PA6). Such improvement appears more obviously with the increasing of HDPE-g-MAH content when the concentration of HDPE-g-MAH is below 20 wt%. Hence,change of HDPE-g-PA6 amount also results in corresponding variations of linear viscoelastic behavior for the blends. The zero shear viscosity of blends increases with the addition of HDPE-g-MAH and approaches invariablenes with 20 wt% HDPE-g-MAH. At low frequency region the dependence of storage modulus on frequency for the blends lends to be weakened with the increase of HDPE-g-MAH concentration and begins to show "second plateau" with 10 wt% HDPE-g-MAH. These phenomena reflect macromolecular-chains entanglement enhancement clue to HDPE-g-PA6 forming. Both changes in morphologies and viscoelastic behavior for blends are ascribed to formation of HDPE-g-PA6. Compared with SEM observation, dynamic rheological testing gives much information about interface and interaction between macromolecular-chains. It is suggested that structure evolution with increase of HDPE-g-MAH content for HDPE/PA6 blends can be characterized preferably by using dynamic rheological measurements.

Polyamide-6/Poly(lactic Acid) Blends Compatibilized by the Maleic Anhydride Grafted Polyethylene-Octene Elastomer

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Reactive Compatibilization of Polyamide 6/Olefin Block Copolymer Blends: Phase Morphology, Rheological Behavior, Thermal Behavior, and Mechanical Properties

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Study on the Microstructures and Mechanical Behaviour of Compatibilized Polypropylene/Polyamide-6 Blends

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

Compatibilization of Polyamide 6/Poly(2,6-Dimethyl-1,4-phenylene Oxide) Blends by Poly( Styrene-Co-Maleic Anhydride)

Compatibilization Effect of PP-g-(MAH/VAc) on Polypropylene/Polyamide 6 Blends

Reactive Compatibilization of Poly(Phenylene Oxide)/Polyamide 6 Blended with Poly(Phenylene Oxide) Grafted Glycidyl Methacrylate Copolymer

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Enhanced compatibility of PA6/POE blends by POE-g-MAH prepared through ultrasound-assisted extrusion

Biosourced Poly(lactic acid)/polyamide-11 Blends: Effect of an Elastomer on the Morphology and Mechanical Properties

Maleic Anhydride-Grafted Isotactic Polybutene-1 and Modified Polyamide 6

Melt Rheological and Thermoresponsive Shape Memory Properties of HDPE/PA6/POE-g-MAH Blends

Highly toughened poly (lactic acid)/poly (butylene adipate-terephthalate) blends in-situ compatibilized by MMA-co-GMA copolymers with different epoxy group content

Morphological, Thermal, and Mechanical Characterization of Bio-Based High-Density Polyethylene / Biopolyamide 6.10 Blends Compatibilized with PE and SEBS Functionalized With Maleic Anhydride

Super Tough PA6/PP/ABS/SEBS Blends Compatibilized by a Combination of Multi-Phase Compatibilizers

Study on the Structure and Properties of PA6/POE-g-MAH Blends

Compatibilization Effect of MMA-co-GMA Copolymers on the Properties of Polyamide 6/poly(vinylidene Fluoride) Blends

MORPHOLOGICAL EVOLUTION AND VISCOELASTIC BEHAVIOR OF COMPATIBILIZED HDPE/PA6 BLENDS