Abstract:Corrosion of reinforcement in concrete civil structures poses a significant challenge to their integrity and durability. To ensure the safety and longevity of such structures, effective monitoring strategies that can accurately detect, localise and assess the progression of damage are crucial. For most existing concrete structures, this is often challenging, as damage is already present when the monitoring campaign starts. In addition, reinforced concrete structures can be subject to a combination (or a succession) of corrosion and load-induced damage. By combining multiple measurement techniques, a more accurate and reliable condition assessment of concrete civil structures can be aimed for. This paper presents a comprehensive experimental study of the combination of vibration-based monitoring (VBM) and acoustic emission (AE) sensing techniques during progressive load tests of corroded reinforced concrete beams. Five beams were subjected to a cyclic four-point bending test, three of which were previously corroded while two beams remained undamaged prior to the mechanical loading. The influence of pre-existing corrosion damage and corresponding longitudinal concrete cracking on the modal characteristics (natural frequencies and strain mode shapes) and AE outcomes is investigated during the four-point bending test. The monitoring results obtained by both techniques are shown to be influenced by the pre-existing longitudinal concrete cracking caused by the reinforcement corrosion. Lower AE activity and a lower reduction in natural frequencies is observed for corroded RC beams during load bending tests when compared to uncorroded specimens. In addition, bending cracks occurring within the corroded zones appear to have a very limited effect on the identified strain mode shapes. These observations could possibly result in an underestimation of the damage and corresponding overestimation of the load-carrying capacity, as the corrosion damage conceals the occurrence of bending cracking on the AE and VBM outcomes.

Laboratory Investigation of Early Damage Detection for an Old-Aged Reinforced Concrete Beam Using Acoustic Emission and Digital Image Correlation

Automated Finite Element Modeling and Analysis of Cracked Reinforced Concrete Beams from Three Dimensional Point Cloud

To Monitor Fracture Behaviors in Four-Point Cyclic Bending Tests of Low-Activated High Alumina Concrete and Standard Concrete RC Beams Using Acoustic Emission Technique

Damage location, quantification and characterization of steel-concrete composite beams using acoustic emission

Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Experimental Investigation on Damage of Concrete Beam Embedded with Sensor Using Acoustic Emission and Digital Image Correlation

Fracture monitoring of steel and GFRP reinforced concrete beams using acoustic emission and digital image correlation techniques

Acoustic Emission Monitoring of Progressive Damage of Reinforced Concrete T-Beams under Four-Point Bending

Vibration monitoring and acoustic emission sensing during progressive load tests of corroded reinforced concrete beams

Analysis of Low-Temperature Damage of Reinforced Concrete Beams Using Acoustic Emission Parameters

Acoustic Emission Study on the Damage Evolution of a Corroded Reinforced Concrete Column under Axial Loads

Damage assessment of precast reinforced concrete beam-column connections using AE technology

EXPERIMENTAL INVESTIGATION AND DESIGN OF SEVERELY CORRODED REINFORCED CONCRETE BEAMS

Acoustic Emission Analysis of Corroded Reinforced Concrete Columns under Compressive Loading.

Study on Surface Cracking of Corroded Reinforced Concrete Based on DIC Method

Intensity Analysis Method of Acoustic Emission Signals for the Damage Monitoring of Post-Tensioned Concrete Beams

Evaluation of damage in reinforced concrete bridge beams using acoustic emission technique

Residual strengths of reinforced concrete beams with heavy deterioration

Nondestructive Monitoring Techniques for Crack Detection and Localization in RC Elements

Crack detection and classification of repaired concrete beams by acoustic emission monitoring